User Manual Navigation software for the Alpine Navigation System UK English March 2015, ver. 1.
Table of contents 1 Warnings and safety information ............................................................................ 5 2 Getting started ........................................................................................................... 6 2.1 Initial set-up ...................................................................................................................... 6 2.2 Screen controls..............................................................................................
.1.7 Selecting a location on the map ............................................................................................ 37 3.1.8 Planning a Multipoint Route ................................................................................................. 38 3.2 Checking Route Information and Alternatives ................................................................ 39 3.3 Checking Traffic Events ..................................................................................................
.3.1.1 Vehicle profile ............................................................................................................................... 65 4.3.1.2 Route Planning Method types ....................................................................................................... 67 4.3.1.3 Navigation Mode........................................................................................................................... 67 4.3.1.4 Road types .............................................
1 Warnings and safety information The navigation system helps you find your way to your destination with the built-in GPS receiver. Alpine Navigation System does not transmit your GPS position; others cannot track you. It is important to look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you plan and review your route before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started Alpine Navigation System is optimised for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. Easy map updates Update your maps regularly as road networks are continuously evolving all over the world. About 15% of the roads are changed each year, new ones are built, directions are altered, new speed limits are set, and many other changes are made. It is easy to keep the navigation system up-to-date. Go to alpine.naviextras.
2. Read the end-user licence agreement, and tap the terms of use. 3. The Configuration Wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can if you agree with to continue. change it in Regional settings (page 68). Tap 5. If needed, modify the time format and unit settings. Later you can change them in Regional settings (page 73). Tap 6. to continue. to continue. If needed, modify the default route planning options.
7. The initial set-up is now complete, tap 8. A warning appears to draw your attention to the hazards of operating, entering data into or obtaining data from the Alpine Navigation System during driving or . transportation. After reading it carefully, tap navigation view. Note! to enter the This warning pops up every time you start Alpine Navigation System. 2.
2.2.2 Using the cursor You can select a map location by tapping the map during navigation. When a map location is selected, the cursor ( map. ) appears at the selected point on the The location of the cursor can be used as the destination of the route or a new Alert Point. You can also search for Places around it or add this location to your saved locations. You can also select some of the objects on the map.
2.2.4 Using touch gestures You usually need to tap the screen only once. However, some useful features can be accessed with other gestures. See the table below. Action Tapping and holding the screen Function Tap and keep pressing the following buttons to reach extra functions: Tap and hold the following button on list and menu screens to show the Navigation view: .
You can perform the following actions on the map: Action Button(s) Checking location information No buttons Moving the map by dragging No buttons Function The top section of the Navigation view shows information about the selected point (the cursor ). Move the map in any direction: tap and hold the map and move your finger towards the direction you want to move the map. Zooming in and out Change how much of the map is displayed on the screen.
2.3 Navigation view The navigation view is the main screen of Alpine Navigation System that shows the planned route on a map. Alpine Navigation System works with digital maps which are not simply the computerised versions of traditional paper maps. Similarly to paper road maps, the 2D mode of digital maps shows you streets and roads. Elevation is also illustrated in colour.
4 Data fields Three data fields show the following information: The estimated time of the arrival at the destination The remaining time of the trip The remaining distance to the destination. By tapping and holding it, you can access additional information about the current trip on a dashboard screen and in the Trip Summary. You can change the default values in Setup (page 71) or by tapping the area where the data fields appear.
17 Destination menu It appears near the destination. By tapping it, you can check the trip summary, find Places around your final destination, save the current location, or suspend the navigation. 18 Additional information It shows the Motorway services, Parking around destination, or the Destination menu button if they are available during navigation. 19 Street name 20 3D objects It shows the current street name. By tapping it, you can open the Where Am I screen. See page 62.
2.3.3 The planned route The planned route is the currently navigated route. Whenever the destination is set, the route is active until you delete it, reach your destination or suspend navigation. Alpine Navigation System displays the route in the following ways: Symbol Name Current GPS position and starting point Description It is your current position displayed on the map. If a vehicle is selected for route calculation and roads are near, the arrow jumps to the nearest road.
A smaller icon shows the type of the second next manoeuvre if it is near the first one. Otherwise, only the next manoeuvre is displayed. 2.3.5 Manoeuvre icons During navigation the next manoeuvre is displayed in the top left corner. Most of the manoeuvre icons are intuitive. The following table lists some of the frequently shown route events: Icon Function Turn left. Turn right. Turn back. Bear right. Turn sharp left. Keep left. Continue straight in the intersection.
2.3.6 Lane information and signposts When navigating on multi-lane roads, it is important to take the appropriate lane in order to follow the planned route. If lane information is available in the map data, Alpine Navigation System displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes and the direction you need to take. Where additional information is available, arrows are replaced by signposts.
2.3.8 Tunnel view When entering a tunnel, the map is replaced with a generic tunnel image so that surface roads and buildings cannot distract you. The top-down overview of the tunnel displayed in a separate window helps you orientate yourself. The remaining distance in the tunnel is also displayed. After leaving the tunnel, the original map view returns. Tunnel view can be turned off in . See page 71. 2.3.
2.3.10 3D object types Alpine Navigation System supports the following 3D object types: Type 3D terrain Elevated roads 3D landmarks 3D buildings Description Alpine Navigation System displays 3D hills and mountains in the Navigation view, and illustrates them by colouring and shading on the 2D map. Elevated roads are complex intersections and vertically isolated roads (such as overpasses or bridges) displayed in 3D. Landmarks are 3D representations of prominent or well-known objects.
2.4 Navigation menu Press the navigation hardkey button to open the Navigation menu. You can see the following menu options when you are navigating without a planned route: Button Function Select your destination by entering an address or its coordinate, or by selecting a Place, a Saved Location, or a Saved Route. You can also look up your recent destinations from the History. When Internet connection is available, the Online Search option can be a further help to find your destination.
Delete the next waypoint or the whole route. The following options are also available on many of the menu screens: Button Function Tap the Menu button to return to the main menu. Check those notifications that contain important information but do not require immediate action from the users. If there are no notifications, this icon is not displayed. The More button appears on the screen to display additional features. Tap it to open the list of additional features on certain screens.
3 Using the navigation By default, Alpine Navigation System calculates routes using the road network of the maps provided with the product. You can select the destination and start navigating to it right away (normal navigation) if you need a route for immediate navigation. You can also plan a route independently of your current GPS position even without GPS reception. To achieve this, you need to set a new starting point in the Multipoint Route menu.
2. Tap . You can see the input field at the top of the screen. Right next to it you can see the search area, the town around which the search is carried out. The default search area is the area where you are located. For a local search, skip the next step. 3. (optional) To search in a different area, tap the input field with the search area, and start entering the name of the new search area on the keyboard. You only need to enter a few letters to get a result.
6. If necessary, tap on the right side of the list and then tap the related button to narrow the list of search results by type (the number on the related icon shows the number of the matching results): Tap address. to see the list of recent destinations with a matching name or Tap to see the list of your saved locations with a matching name. Tap to see the list of matching addresses. Tap to see the list of matching Place category names. Scroll the list and select one of the categories.
3.1.2 Selecting an address If you know at least a part of the address, this is the quickest way to select your destination. Using the same screen, you can find an address by entering the following information: The exact address, including the house number, see page 25 The centre of a town, see page 26 The midpoint of a street, see page 27 An intersection, see page 27 Any of the above, starting the search with the postal code, see page 28. 3.1.2.
a. Start entering the street name on the keyboard. The names that match the string appear in a list. b. Tap list. c. Enter the house number or crossing street on the keyboard. (To enter letters, tap d. 3. to open the list of results. Select the street from the .) Tap the selected address to finish the address search. The route is calculated and the map appears showing the entire route, where you can check route information and route alternatives.
b. To open the list, tap , and select the town or postcode. 3.1.2.3 Selecting the midpoint of a street To navigate to the midpoint of a street without entering the house number, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Go to 3. Tap and start entering the street name on the keyboard. The names that match the string appear in a list. 4. Tap 5. Instead of entering the house number, tap street is selected as the destination.
5. Start entering the name of the crossing street (tap to enter letters), or tap to open the list of results. Select the crossing street from the list. 3.1.2.5 Using the postcode to select a destination You can also select any kind of destination by entering the postcode instead of the city name. To select the postcode, perform the following steps: 1. Go to 2. Tap 3. Tap 4. Tap 5. Continue the search as described previously (page 25).
3.1.3 Selecting a Place of Interest You can search for Places of Interest (Places) in the menu. Using the same screen, you can find a Place by selecting one of the following options: Finding frequently searched types of Places with the Quick search categories, see page 29 Searching for a Place by its name, see page 32 Searching for a Place by its category, see page 30 In case of emergency, you can also find help nearby, see page 34 3.1.3.
3. Tap any of the quick search buttons to get an instant list of Places. 4. The Places in the list can be ordered by their distance from the current or last known position, from the destination, or by the length of the necessary detour. If you need to . To filter the list of results by providers, tap reorder the list, tap and then the provider logo on the right side of the screen. to further filter the list of results. 5. (optional) If needed, tap 6. Browse the list and tap one of the list items.
minimal detour only, such as searching for upcoming petrol stations or restaurants. (The result list is ordered by the length of the necessary detour.) Tap to search for a place around the destination of the planned route. (The result list is ordered by the distance from the destination.) Tap to search for a place within a selected town. (The result list is ordered by the distance from the centre of the selected town.) 4. (optional) If you have selected , select the town to search in. 5.
The length of the necessary detour. Tap to reorder the list. To filter the list of results by providers, tap right side of the screen. and then the provider logo on the 8. Browse the list and tap one of the list items. A full screen map appears with the selected point in the middle. 9. The process continues the same way as in case of any other search for Places. See page 29. 3.1.3.
4. (optional) If you have selected , select the town to search in. You can search for the name of a Place in all categories by performing the following steps: 1. Tap . Using the keyboard, start entering the name of the Place or browse in the categories. 2. to open the list of Places or Place After entering a few letters, tap categories with names containing the entered character sequence. 3. Browse the list, if necessary, and tap the desired list item.
3.1.3.4 Finding help nearby To quickly search for nearby assistance, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap and . Places in the following pre-set search categories can be searched for around the current position (or around the last known position if the current position is not available): : Car repair and roadside assistance services : Medical and emergency services : Police stations : Petrol stations 3.
3.1.4 Selecting a Saved Location To select a location that you have already saved (page 48), perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap 3. The list of Saved Locations is displayed. It contains two pre-set categories: Home and Work. 4. Tap the location that you want to set as your destination. If necessary, browse the list to see more results. 5.
3. Select a destination from the list. 4. The route is calculated and the map appears showing the entire route, where you can check route information and route alternatives. Tap route parameters, or tap to modify the to start your journey. Three of the Smart History Items are displayed in the History screen for easy access. You can select one of them as your destination. 3.1.6 Entering coordinates To select a destination by entering its coordinates, perform the following steps: 1.
(optional) If necessary, tap the coordinate in UTM format. then and enter Tip! 4. The route is calculated and the map appears showing the entire route, where you can check route information and route alternatives. Tap route parameters, or tap to modify the to start your journey. 3.1.7 Selecting a location on the map To select a map location, perform the following steps: 1. Locate your destination on the map. Move and scale the map as necessary. 2.
Tip! If you already have a planned route, tap and to add the selected location to your route. 4. Tap to select the cursor as the destination. 5. The route is calculated and the map appears showing the entire route, where you can check route information and route alternatives. Tap route parameters, or tap to modify the to start your journey. 3.1.8 Planning a Multipoint Route To build your route destination-by-destination, perform the following steps: 1.
5. The New Route to... screen appears, where you can select the destination of the route the same way as described in the previous sections. 6. If needed, you can add further intermediate destinations. 7. or tap to To add more route points, tap change the final destination. The Add to Route... menu appears again, where you can select the new route point the same way as you have set the destination before. 8. (optional) Tap to optimise the whole route or the order of waypoints.
4. The total time of route. You have the following options on this screen: Tap to receive detailed information about the route. If you tap on the right side of the screen, you can narrow the route information, for example to show only motorway sections or toll roads. Tap route for you. to list route alternatives and select the most suitable Tap on the Route Summary screen to carry out additional actions, for example edit your route preferences or display the itinerary. 3.
To check the traffic summary, perform the following steps: 1. On the Navigation view, tap the traffic icon in the corner (for example, the Traffic Summary screen. 2. If there is at least one significant event on the planned route, a description is displayed to see the list of all events. about the next event. Tap 3. ) to open Tap any of the list items to see its details and to display the affected road segment in its full length on the map.
3. Tap to display historical traffic information. A 2D map is displayed with road segments coloured by the likely density of the traffic in the given period. The information relevant for the current period is shown when you open the screen. If necessary, you can browse the map for a better view of certain road segments. Modify the day of week and the time of day to see the desired period. 3.4 Editing the route When navigation has already started, there are several ways to modify the planned route.
3. The first line from the bottom is the start of the route, normally the current GPS position. Tap at the warning message. , select , and confirm your action 4. The Change Start to... screen appears. Select the starting point of the route the same way you select a destination. 5. The Multipoint Route screen appears where you can continue adding a destination to your route. 6. Tap to continue. The map returns with a transparent position marker (showing that there is no GPS reception).
Press the navigation hardkey button and tap as described on page 38. . Add a destination to your route 3.4.3 Modifying the list of destinations To edit your route, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. In the Navigation menu, tap . You have the following options on this screen: Tap or the route. Tap the name of the intermediate destination to move it up or down in the list, to save the location, or to delete it from the list.
3.4.4 Saving the planned route To save the planned route, perform the following steps: 1. Select a destination as described earlier. 2. Tap 3. Type in a name and tap 4. The route is saved and it is available in and . . in the Navigation menu. By selecting a previously saved route, Alpine Navigation System recalculates the route using the saved destination and/or the waypoints. 3.4.
3.4.6 Selecting a route alternative when planning the route To select from different route alternatives or change the route planning method after you have selected a new destination, perform the following steps: 1. Select a destination as explained earlier, and go to the route confirmation screen. 2. Tap 3. You can see the basic details of route alternatives. Tap any of them to see it on the map. 4.
3.4.7 Selecting a route alternative for an existing route To recalculate the planned route with a different route planning method and to compare different route alternatives, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. You can access the list of route alternatives from the Navigation menu in one of the following ways: 3. Tap and Tap and . . You can see the basic details of a few route alternatives.
3.5 Saving a location To add any location to the saved locations (the list of frequently used destinations), perform the following steps: 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, and so on. 2. When the map appears with the route, tap 3. Tap 4. (optional) Using the keyboard, you can change the name offered for the Saved Location. 5. Tap . . to save the location.
3.5.1 Editing a Saved Location To edit a location that you have already added as a Saved Location, perform the following steps: 1. Press the navigation hardkey button, and tap 2. The list of Saved Locations is displayed. 3. Tap 4. Tap the location you want to edit, tap and location on the keyboard, then tap . . and enter the name of the . In Saved Locations, Home and Work cannot be renamed. To change your home Note! 5. Tap or work location, tap address change. or , and confirm the .
1. Return to the Navigation view, and select the Alert Point. The red cursor ( appears there. ) 2. Tap 3. Scroll down the list and tap 4. Select the type of the Alert Point, the direction from which you expect the alert, and (if applicable) the speed limit for this Alert Point. 5. Tap . . to save the location as a new Alert Point. 3.7 Running a Simulation To run a simulated navigation that demonstrates the planned route, perform the following steps: 1.
3. Tap 4. Tap . The simulation starts from the starting point of the route and leads you through the whole planned route using a realistic speed. . (optional) You have the following controls during the simulation (the control buttons disappear after a few seconds but you can open them again if you tap the map): : Jump to the next route event (manoeuvre). : Pause the simulation. : Jump to the previous route event (manoeuvre). 5.
3.8.1 Switching to off-road navigation To switch to off-road navigation, perform the following steps: 1. Press the navigation hardkey button, and tap 2. Tap and select , and . . Most of the procedures described for on-road navigation also apply to off-road navigation. However, there are some that are not available in this navigation mode. For example: You cannot open the itinerary as you have no manoeuvres just route points and straight lines between them.
3.9 Updating the navigation software and the maps To update your navigation software and its maps, you need the following: A PC equipped with the following: Microsoft Windows® operating system (Windows XP Service Pack 2 or later) Internet connection USB port An empty USB storage device with a capacity of at least 2 GB To update your navigation software and its maps, perform the following steps: 1. 2. Download and install the Toolbox PC tool on your PC. a. Go to the alpine.naviextras.
4. Perform the update on your navigation system. Do not switch off your navigation system during the following process. Caution! Do not remove the USB storage device until the preparation process is completed. a. Start the navigation system while your vehicle is parked, and go to any navigation-related screen. b. Insert the USB storage device that now contains the updates into the USB port of your navigation system. c. Tap Yes on the confirmation screen.
4 Reference guide The following sections describe the different concepts and menu screens of Alpine Navigation System. 4.1 Concepts The following sections describe and explain navigation-related concepts. 4.1.1 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation.
approaching one of these points, and an extra alert warns you if you exceed the given speed limit while approaching. Visual warning: the type of the Alert Point, its distance and the related speed limit appear on the Navigation view while you are approaching one of these locations. For some of the Alert Points, either the enforced or expected speed limit is available. For these points, the audio alert can be different if you are below or above the given speed limit.
4.1.5 Smart Zoom Smart Zoom provides the following features: While following a route: When approaching a turn, it zooms in and raises the view angle to let you easily recognise your next manoeuvre. If the next turn is at a distance, it zooms out and lowers the view angle to be flat so you can see the road in front of you. While driving without a planned route: Smart Zoom zooms in if you drive slowly and zooms out when you drive at a high speed. 4.1.
4.1.8 Real-time traffic Real-time traffic information can provide you with the current status of the traffic. Route calculation can avoid road blocks or unexpected traffic jams caused by an accident. The following data sources are available: Traffic Message Channel (TMC): TMC is a specific application of the FM Radio Data System (RDS) used for broadcasting real-time traffic and weather information.
You can ignore this message and keep the original route by tapping you can check the suggested route by tapping or . By tapping the plus/minus signs, you can increase or decrease the distance to avoid on the highway. You can accept the recommended detour by tapping . 4.1.9.2 Real-time alternative routes Alpine Navigation System may offer an alternative route on normal roads in case of a traffic jam. The possible alternative route window appears and shows the length and duration of the detour.
4.1.9.3 Parking around destination If you leave the planned route by exiting a motorway, Alpine Navigation System tries to guess the reason for making a detour. By tapping , you can open a top-down map with the recommended parking Places around the destination. By tapping the arrows on the sides, you can switch between the recommended parking facilities. By tapping becomes your destination.
4.2 Information menu The Information menu provides various additional functions. It can be found in the Navigation menu. You need an Internet connection via your mobile phone to access online services, like parking and weather information. Button Description Shows information on the current position (latitude, longitude, nearest town, next crossing street, and so on) or the last known position if GPS reception is not available. See page 62. Offers assistance near your current position. See page 34.
4.2.1 Where Am I This screen contains information about the current position (or about the last known position if GPS reception is not available). You can access it the following two ways: By going to the Navigation menu and tapping By tapping the current street name if it is displayed below the current position marker on the map. and .
4.2.2 Trip Monitor Trip Monitor logs information about your route. You can record a new trip by tapping and stop it by tapping . By tapping options: Button on the Trip Monitor screen, you can select the following Function By selecting a recorded trip, you can delete, rename, or change the colour of the recorded route. You can access the Trip Monitor Settings, where you can enable saving the trip logs automatically or you can save the trip logs manually. See page 75.
4.3 Setup menu You can configure the navigation settings, and modify the behaviour of Alpine Navigation System, by pressing the navigation hardkey button, and tapping . Tap the arrows to view the content of other pages. The Setup menu provides the following options: Button Function Select the type of vehicle you are driving, the road types used in route planning, and the route planning method. Adjust the different sound volumes.
Modify the basic software parameters set during the initial set-up process. See page 6. Create or use your own user profile for navigating, to be able to use your own settings. Delete all saved data and reset all settings to their factory defaults. 4.3.1 Route preferences The following settings determine how routes are calculated: Button Function Set the type of vehicle you want to use to navigate the route.
Manoeuvre restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for buses is allowed. Private roads, resident-only roads and walkways are excluded from routes. Manoeuvre restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for taxis is allowed. Private roads, resident-only roads and walkways are excluded from routes.
To reset all vehicle profiles to their , and default settings, tap , . 4.3.1.2 Route Planning Method types You can select from the following route planning method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually, the best selection for fast and normal cars. Results in a route with fewer turns and no difficult manoeuvres.
Button Description You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time. They can be enabled or disabled separately from toll roads. Per-use toll roads are pay roads where there is a per-use charge in the routes by default. If you disable toll roads, Alpine Navigation System plans the best toll-free route.
Button Volume slider Function Adjust the volume of the related sound. Mute the related sound. The slider becomes inactive. Tap again to reenable it. Button Function Disable verbal instructions. This function is enabled by default. Choose from the following options: Announce the street names in the native language area of the selected voice guidance language. Announce the road numbers only. Announce the manoeuvres only.
4.3.3 Warnings You can enable and modify the following settings: Button Description Alpine Navigation System is able to warn you if you exceed the current speed limit. This information may not be available in your region, or may not be fully correct for all roads on the map. The maximum speed set in the vehicle profile is also used for this warning. Alpine Navigation System alerts you if you exceed the pre-set value even if the legal speed limit is higher.
Maps may contain driver alert information that can be shown on the Navigation view in a similar way as real-life road signs. Tap it to enable or disable the warning for these road segments (for example, dangers and sharp curves). For each category of warning signs, set the warning type (visual or audio and visual) and the distance from the hazard to receive the warning at. 4.3.4 Navigation View These settings allow you to fine-tune the appearance of the Navigation view.
Select which Places to show on the map while navigating. Too many Places make the map crowded so it is a good idea to keep as few of them on the map as possible. Tap the name of the Place category to show/hide it or to open the list of its subcategories. You can modify the following additional settings on the Navigation View screen: If you are navigating with a planned route, you can set three data fields to be displayed on the Navigation view.
4.3.5 Regional You can modify the following settings: Button Description It displays the current written language of the user interface. Tap it to select a new language from the list of available languages. The application restarts after you change this setting and confirm it. It shows the current voice guidance profile. Tap it to select a new profile from the list of available languages and speakers. Tap any of these to hear a sample voice prompt. Just tap the new spoken language.
4.3.7 Traffic You can modify the following settings: Button Function Enable or disable the Traffic reception that can receive real-time traffic information. The rest of the buttons below are all related to the Traffic function and are available only if the receiver is enabled. Tap it if you want to use online traffic information to avoid road blocks or unexpected traffic jams.
4.3.8 Trip Monitor Trip logs contain useful information about your recorded trips. You can enable and modify the following settings: Button Description Trip monitor can record statistical data of your trips. If you need these logs later, you can let the application save them automatically for you. Track logs, the sequence of the positions given by the GPS receiver, can be saved together with trip logs. They can later be displayed on the map.
5 End-user licence agreement 0. Definitions The following terms shall have the meaning defined hereunder in this agreement when used with capital letters. The text of this agreement may also contain further defined terms. “Agreement” means this End User Licence Agreement (EULA) containing the terms and conditions of use of the Software, Databases and Services by You as the end user.
Product is a commercial item as that term is defined at 48 C.F.R (“FAR”) 2.101 and that all use of the Navigation Product is subject to this Agreement. 3 Applicable law and venue 3.1 This Agreement will be governed by the laws of the country where the Licensor has its statutory seat or in the absence of such incorporation where it has its central administration (“country of residence”) without regard to such country’s choice of law provisions. 3.
5.2 Intellectual property rights of Licensor, the Software Owner or other rightholders extend to the whole Navigation Product and to its parts separately as well. 5.3 The owner(s) of the copyrights of the Database(s) is (are) the Licensor, or natural person(s) or corporate business entity(ies) (referred to as: “Database Owner”) who supply them.
disclose them in full or in part to the public in any format or to download them from the Navigation Product. 8. No warranty, limitation of liability 8.
Safety (e.g. speed) cameras are provided for informational purposes only and may not be used to encourage, facilitate or support the violation of any laws. Furthermore some countries prohibit the display or use of such features. Compliance with country specific laws and any usage or reliance on the information by user shall be at the User's own risk and sole responsibility. 8.7 Database and Services provided by third parties.
10.3 Collected data is transmitted, stored and handled anonymously and no connection of the data with the User shall be established by Licensor or any third party. 10.4 Licensor hereby informs the User, that if it accesses the Internet through mobile data service while abroad or otherwise roaming another mobile network the transmission of such data may result in special roaming charges.
11.6 Connected Services may provide data, information or materials supplied and/or licensed by third parties to Licensor. For such materials different terms and conditions imposed by such third parties may apply. Applicable third party terms shall be listed in the “About” section of the Navigation Product, in the Device documentation, at a website address indicated in the “About” section or as part of this Agreement.
Traffic data may not be archived and may only be delivered for Users’ near term personal use not to exceed one twenty-four hour period. 13. Third party attribution Attribution of third parties (e.g. copyright notices) supplying software modules, Databases, Services or other material to the Navigation Product are listed in the “About” section of the Navigation Product or at a website address indicated in the “About” section.
6 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2015 – Alpine Electronics, Inc. All rights reserved. © 2015 – NNG Kft. All rights reserved. Map data: © 1987 - 2015 HERE. All rights reserved. See http://corporate.
