User's Manual

Introduction
Thank you for purchasing JINS MEME. "JINS MEME Precautions for Use" contains
instructions on how to use JINS MEME and other important information. For information
on how to take care of the device and what to do in the event of any problems, please
visit the JINS MEME website support page at the URL given below.
In order to get the best from your JINS MEME, please read this manual carefully so that
you know how to use the device correctly and safely. Please keep this manual in a safe
place so that you can refer to it at any time.
The unauthorized duplication or transcription of part or all of this manual is prohibited.
While we have made every eort to ensure the integrity of the content of this
manual, should you notice any errors or other problems, please feel free to contact the
JINS Customer Support Center. The contents of this manual are subject to change
without prior notice. If the product is used in a way that is not described in the
manual, the product may be damaged, with possible personal injury or damage to
property. If you give JINS MEME to someone else, please be sure to give them this
manual as well.
Trademarks
Google Play, the Google Play logo and Android are trademarks or registered
trademarks of Google Inc. Apple and the Apple Logo are trademarks or registered
trademarks of Apple Inc. in the US and other countries. App store is a service mark of
Apple Inc. iOS is a trademark or registered trademark of Cisco in the US and in other
countries, and is used under license. Bluetooth is a trademark or registered
trademark of Bluetooth SGI Inc. in the US. Other company names and manufacturing
names are the trademarks or registered trademarks of the respective companies.
The symbols ™ and ® are not used alongside company trademarks or registered
trademarks in this manual.
Safety precautions
JINS MEME is designed so that it can be used as an ordinary pair of glasses when JINS
MEME Core is correctly mounted on a JINS MEME compatible frame. However, as JINS
MEME Core contains electronic components, if it is used incorrectly, it may be damaged
in ways that are dierent from the use of ordinary glasses. Please read the following
safety information carefully to understand how to use the device correctly and safely.
JINS MEME is not a medical device. Neither JINS MEME nor any related apps can be
used for the diagnosis, treatment or prevention of any illness, condition or injury. In the
event of any abnormality, cease using the device immediately and contact JINS
Customer Support Center. If you continue to use a defective device, there may be
adverse eects on your health. Statements in the manual regarding safety are divided
into "Warning" and "Caution", in order to indicate clearly the level and urgency of
possible harm and injury.
If you have an implanted cardiac pacemaker or an implanted debrillator, do not
bring these devices any closer than 15cm to JINS MEME Core. The electromagnetic
waves from JINS MEME Core may aect the operation of implanted cardiac
pacemakers or debrillators. Do not use JINS MEME Core in crowded places such
as packed trains. If there are people nearby with implanted cardiac pacemakers or
implanted debrillators, the electromagnetic waves from the device may aect the
operation of their implanted cardiac pacemakers or debrillators. Do not tamper
with JINS MEME Core or the charging clip or any other accessories, or carry out any
of the following actions, as they may result in injury, damage or malfunction. (Do not
drop, bump, excessively bend, warp, drill holes in or paint the device.) Do not place
JINS MEME or its accessories close to or above the airbag in an automobile. Serious
accidents could occur if the airbag is deployed.
Please do not disassemble or modify JINS MEME Core or accessories such as the
charging clip. Do not attempt to repair the device by yourself. There are no
customer-repairable parts in the device, and any attempt to do so may result in
an unexpected accident. If JINS MEME suers a device failure, please contact JINS
Customer Support Center.
Do not allow JINS MEME Core or the charging clip or other accessories to get
wet during charging, or expose them to moisture or rain. Exposure to moisture
during charging may lead to electric shock, short circuit or re. Charge the
device out of the reach of small children. Failure to do so could lead to unexpected
accidents or electric shock.
Do not place JINS MEME Core or the charging clip or other accessories near to
an open ame, such as a gas burner, candle or electric heater, or expose them to
the hot air of a hair drier, etc. Doing so may cause battery explosion, discoloration,
warping, damage, overheating, re or device failure. When not in use, the device
should be stored in its case.
Please be sure to disconnect the Bluetooth connection between JINS MEME Core
and your smartphone when you are in an area where the use of wireless devices is
prohibited, for example in airplanes or hospitals. Failure to do so may result in
adverse eects on electronic equipment and medical equipment, and may cause
malfunction. The lenses may crack if subjected to strong force. If worn while
playing sports in which there is strong physical contact, or struck by a hard object, the
broken lenses could cause blindness, or serious injury to the eyes or head. If you
suer from allergies or have a sensitive skin condition, there is a possibility that
you could suer some kind of attack, or that existing symptoms could worsen. If
you experience any kind of physical discomfort, stop using the device immediately
and consult your doctor.
Precautions to be observed when handling the built-in battery
Do not use or charge JINS MEME Core in environments of extremely high
temperatures (sauna, etc.) or extremely low temperatures. Such usage could
lead to burns, or discoloration, warping or damage to the device, as well as
overheating, re and malfunction. The operating temperature range of the
device is 0 to 40.
Always use the accessory charging clip to charge JINS MEME Core. Failure to do
so could lead to electric shock, short circuit, re, malfunction or device failure.
Never attempt to use JINS MEME during charging. There is a risk of suering
burns and electric shock. Also, immediately aer charging, JINS MEME Core
may become very hot. Do not wear the device if it is very hot. Do not attempt
to clean JINS MEME Core during charging, such as wiping it with a damp cloth.
Before cleaning JINS MEME Core, always be sure to remove the charging clip.
Failure to do so could lead to electric shock, short circuit or re. Do not use
the JINS MEME Core charging terminal or charging clip micro USB terminal plug
if they have dirt or foreign objects sticking to them, or if they are warped. This
could lead to electric shock, short circuit or re. When charging, always be
sure to properly open and close the charging clip when using it. Failure to do so
could result in damage to the charging terminal or device failure. When
removing the USB cable from the USB terminal or AC adapter, always be sure to
pull it out by grasping the plug and not the wire. Also, never touch it with wet
hands. This could lead to electric shock, short circuit, broken wires or device
failure. Follow the procedures given in the JINS MEME User Manual (Quick
Guide) in order to charge the JINS MEME Core battery. Failure to do so could
result in electric shock, overheating or device failure.
Never put JINS MEME Core into re, subject to heat or incinerate. The battery
could explode or catch re.
JINS MEME Core is waterproofed against daily life situations, such as exposure
to rain or perspiration. However, do not take JINS MEME Core into situations
where it would be directly exposed to water, such as a bathroom, sauna or
pool, etc. This could cause a short circuit or device failure. Never use
abrasives, alcohol, thinner, benzene or remover, etc., to clean JINS MEME Core
or the charging clip. Also, never wash them with water. This could lead to
discoloration and warping as well as damage or device failure. Unless
specied in this Manual, never insert anything into the terminals. This could lead
to damage of the internal components. Do not store JINS MEME Core or the
charging clip together with hard objects made of metal, etc., which may
scratch them.
Keep the device out of the reach of small children. Failure to do so could lead
to unexpected accident or injury, such as the swallowing of small parts.
Precautions when handling the three electro-oculography sensors
(JINS MEME Core nose pad, sensors between the eyebrows)
Do not push, bend or apply force to any of the three electro-oculography sensors. This could cause damage
or device failure.
Adjustment of the nose pad should only be carried out at JINS MEME stores. If you attempt to adjust the
pad by yourself, you may damage the pad or render it unable to make correct measurements. Aer using,
wipe the sensors gently with a so cloth, such as a lens cloth. Careless handling of the sensors may result in
malfunction or device failure. If the three electro-oculography sensors are soiled with sweat, oily deposits
or make-up, etc., gently wipe them clean. If dirt is le on a sensor, it may not be able to measure correctly.
If used for an extended period of time, the JINS MEME Core charging terminal may become clogged with
dirt and unable to charge properly. Regularly use a dry cotton swab to clean the terminal.
Handling precautions
Please pay attention to the following points when handling JINS MEME, in order to avoid damage or device failure.
Please use both hands to carefully put on or remove JINS MEME. If JINS MEME does not t your face properly,
the data from the three electro-oculography sensors, the three-axis speed sensors and the three-axis gyro-sensors
may not be detected properly, and correct data may not be able to be obtained. If the glasses do not t your face
properly, have them adjusted at a JINS MEME store. JINS MEME is intended for use by persons 10 years old or
over, but if JINS MEME does not t properly over your child's face, the data from the three electro-oculography
sensors, the three-axis speed sensors and the three-axis gyro-sensors may not be detected properly, and correct
data may not be able to be obtained. When placing JINS MEME on a desk or other hard surface, be sure to have
the convex lenses facing upwards. If the lenses are facing downwards, they may be scratched. Do not expose to
heat or use in an area of high temperature. This may cause the frame to crack or warp. Do not go to bed
wearing JINS MEME. If you fall asleep while wearing JINS MEME, this may cause warping, damage or device failure.
Do not place JINS MEME Core or the charging clip in an ultrasonic cleaner. This may cause damage or device
failure. When cleaning a JINS MEME frame, rst remove the charging clip. If JINS MEME Core is not charged for a
long time, the battery life may become shorter, the usage time may become shorter, and it may become more
dicult for JINS MEME Core to power up. Make sure JINS MEME Core is charged regularly. The JINS MEME Core
battery is built-in, and cannot be replaced. If the battery cannot be recharged, please contact JINS Customer
Support Center. JINS MEME Core contains a lithium ion battery. If you wish to discard JINS MEME Core, do not do
this by yourself, but take it to a JINS store. The charging clip and other accessories should be disposed of in
accordance with the laws and regulations of the area where you live.
Notes regarding electromagnetic waves
Bluetooth uses the 2.4GHz frequency band. In addition to microwave ovens and other industrial, scientic and
medical equipment, this frequency band is also used by mobile body identication in-ight radio that requires
a license and other similar radio stations and factory production lines, etc., and by special low-power radio
stations and amateur radio stations that do not require a license (hereinaer, "other radio stations").
Before carrying out JINS MEME communication, make sure that there is no other radio station operating in the
vicinity. If there is radio interference between JINS MEME and another radio station, quickly change the location
where you are using JINS MEME, or disconnect Bluetooth. If this still does not resolve the problem, contact JINS
Customer Support Center. Use the device away from other electrical appliances (such as microwave ovens, and
cordless digital telephones, etc.). If you are using the device in the vicinity of other equipment, it may not be able to
communicate properly and there may be radio interference. If you are experiencing communication diculties, try
moving away from those devices. If you are close to a broadcasting station or radio station and your device will
not operate normally, try using JINS MEME in a dierent location. If the surrounding radio waves are too strong,
your device may not be able to operate properly. If you are using JINS MEME in the vicinity of equipment with
wireless LAN mounted, there may be radio interference which will reduce the communication speed or cause
connection failure. Please try to use the device away from equipment with wireless LAN mounted.
Product specications
JINS MEME Core specications
Battery: Built-in rechargeable lithium ion battery
Charging time: Approx. 3 hours
Usage time: Active mode (continuous usage): Max. roughly 24 hours. *1
Sleep mode (standby): Roughly 2 weeks
*1 The usage time of the gyro-sensors is approximately 11 hours.
Weight: Approx. 6g
Materials: Plastic, SUS316L (electrodes)
Sensors: Three electro-oculography sensors / three-axis speed sensors/
three-axis gyro (angular velocity) sensors
Communication system: Bluetooth Low Energy
External interface: Dedicated charging terminal
Operating environment: Temperature: 0 to 40 /
humidity 10 to 90% RH (no condensation)
JINS MEME Core operating environment
Please visit the JINS MEME website for information on supported devices,
OS and languages.
Charging clip specications
Weight: Approx. 6g
Material: Plastic
External interface: micro USB terminal
Operating environment: Temperature: 0 to 40 / humidity 10 to 90% RH (no condensation)
Standards certied
For details on the standards certied, please visit the JINS MEME website.
MODEL : JINS MEME CORE
FCC ID: XXXYYYYYYYYYYYYYY
IC: XXXXXX-YYYYYYYYYYY
This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canadas
licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including inter ference that may cause
undesired operation.
Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR dInnovation, Sciences
et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit
accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
FCC CAUTION
Changes or modications not expressly approved by the party responsible for compliance could void the users
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
Lémetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR dInnovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. Lexploitation
est autorisée aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible den comprom-
ettre le fonctionnement.
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules
as this equipment has very low levels of RF energy.
Cet équipement est conforme aux limites de
xposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et dexposition aux
fréquences radioélectriques (RF) CNR-102 de l ISDE puisque cet appareil a une niveau tres bas d'energie RF.
CAN ICES-3(B) /NMB-3(B)
Customer Service
For details on the product and how to handle it,
information on separately sold accessories, and frequently asked questions,
please visit the JINS MEME website.
Contact us:
If you have any questions, please feel free to contact the following,
JINS Customer Support Center https://www.jins.com/jp/contact/
TEL
0120-588-418 (Hours of business: 10:00 to 17:00 (Mon. to Fri.)
*excluding Saturdays, Sundays, holidays and year-end holidays)
*For product defects during the warranty period, please have your warranty card.
Handling of personal information
For details on the handling of personal information,
please read the JINS Privacy Policy.
JINS MEME Precautions for Use
Failure to follow the instructions could result in death or serious injury.
Failure to follow the instructions could result in personal injury or
damage to property.
Indicates an action that must not be performed.
Indicates an action that must be performed.
Indicates the possibility of electric shock or other injury if the product is dismantled.
Indicates the possibility of electric shock.
Indicates the possibility of explosion.
202004-01
CWTCVASW0A
1788F-CVASW0A

Summary of content (1 pages)