User's Manual

HOW TO USE REMOTE KEYLESS ENTRY SYSTEM WITH IGNITION KEY REMOVED

HOW TO USE REMOTE KEYLESS ENTRY SYSTEM WITH IGNITION KEY REMOVEDHOW TO USE REMOTE KEYLESS ENTRY SYSTEM WITH IGNITION KEY REMOVED

HOW TO USE REMOTE KEYLESS ENTRY SYSTEM WITH IGNITION KEY REMOVED

LOCKING DOORS

LOCKING DOORSLOCKING DOORS

LOCKING DOORS

1. Close all doors.

2. Push the lock button on the remote controller.

3. All doors will lock.

4. The hazard indicator flashes twice.

・ When the lock button is pushed with all doors locked, the hazard indicator flashes

twice as a reminder that the doors are already locked.

PAGE 1
HOW TO USE REMOTE KEYLESS ENTRY SYSTEM WITH IGNITION KEY REMOVED LOCKING DOORS 1. Close all doors. 2. Push the lock button on the remote controller. 3. All doors will lock. 4. The hazard indicator flashes twice. ・ When the lock button is pushed with all doors locked, the hazard indicator flashes twice as a reminder that the doors are already locked.
PAGE 2
UNLOCKING DOORS 1. Push the unlock button on the remote controller. 2. Only the driver side door will unlock. Push the unlock button on the remote controller again within 3 seconds. 3. All doors will unlock. 4. The interior light will stay on for 30 seconds. The interior light can be turned off without waiting for 30 seconds by inserting the key into the ignition or by locking the doors with the remote controller. OPENING THE DRIVER'S AND PASSENGER'S WINDOW 1.
PAGE 3
If the battery is removed for any reason other than replacement, perform step 4 above. ・ An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal. ・ The remote controller is water-proof; however, if it does get wet, immediately wipe completely dry. ・ The operational range of the remote controller extends to approximately 49 it (15 m) from the vehicle. This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.