MSDS

ManualsBrandsAlsa Refinish ManualsPaint12 oz. MirraClear Killer Cans Spray Paint

Material Safety Data Sheet

Product name: Killer Cans Product Code: KC Date: 01/01/2012

Page 1 of 6

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

Product name

Product code

Killer Cans

KC-

Product Use Description

Solvent-borne coatings, Primers

Company

Alsa Refinish LLC

1213 E. 58

Pl.

Los Angeles, CA 90001

Telephone

1-323-581-5200

Fax

1-323-515-1089

Emergency telephone number

(800) 535-5053 / (352)323-3500

SECTION 2: HAZARDS IDENTIFICATION

Emergency Overview

Regulatory status

This material is considered hazardous by the OSHA Hazard

Communication Standard (29 CFR 1910.1200).

Signal Word

Form

Odour

Odour - Control parameters

Hazard Summary

DANGER

aerosol

characteristic

no data available

Flammable.

Irritant

Pressurized container. Protect from sunlight and do not expose to

temperatures exceeding 50°C / 122 °F. Flammable Aerosol May

cause fire.

Potential Health Effects

Eyes

May cause eye irritation.

Skin

May cause skin irritation.

Target Organs

Skin

Eyes

Central nervous system

Carcinogenicity:

NTP

No component of this product which is present at levels greater than or equal to 0.1 % is

identified as a known or anticipated carcinogen by NTP.

IARC

No component of this product which is present at levels greater than or equal to 0.1 % is

identified as probable, possible or confirmed human carcinogen by IARC.

OSHA

No component of this product which is present at levels greater than or equal to 0.1 % is

identified as a carcinogen or potential carcinogen by OSHA.

CA Prop 65

This product does not contain any chemicals known to State of California to cause

cancer, birth, or any other reproductive defects.

SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS

Component

EINECS-NO

CAS-No.

Weight %

acetone; propan-2-one; propanone

200-662-2

67-64-1

>= 45 - < 50

Propane

200-827-9

74-98-6

>= 25 - < 35

butane

203-448-7

106-97-8

>= 20 - < 25

2-methoxy-1-methylethyl acetate

203-603-9

108-65-6

>= 2 -< 3

Summary of content (6 pages)

PAGE 1
Material Safety Data Sheet Product name: Killer Cans Product Code: KC Date: 01/01/2012 SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Product name Product code Product Use Description Company : : : : Telephone Fax Emergency telephone number : : : Killer Cans KCSolvent-borne coatings, Primers Alsa Refinish LLC 1213 E. 58th Pl.
PAGE 2
Material Safety Data Sheet Product name: Killer Cans Product Code: KC Date: 01/01/2012 SECTION 4: FIRST AID MEASURES General advice : Inhalation : Skin contact : Eye contact : Ingestion : Move out of dangerous area. Never give anything by mouth to an unconscious person. In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). When symptoms persist or in all cases of doubt seek medical advice. Take off all contaminated clothing immediately.
PAGE 3
Material Safety Data Sheet Product name: Killer Cans Advice on protection against fire and explosion Dust explosion class Storage Requirements for storage areas and containers Advice on common storage Storage period Storage temperature Other data Product Code: KC Date: 01/01/2012 work place. Do not spray on a naked flame or any other incandescent material. Use only in well-ventilated areas. For personal protection see section 8. Keep away from heat and sources of ignition. Do not smoke.
PAGE 4
Material Safety Data Sheet Product name: Killer Cans Product Code: KC Date: 01/01/2012 SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Form Odor Flash point Ignition temperature Thermal decomposition Lower explosion limit Upper explosion limit Vapor pressure Density Volatile organic compounds : : : : : : : : : : Aerosol Characteristic -4°F 365 °C (689 °F) Heating can release hazardous gases., Fire or intense heat 1.3 %(V) 13.1 %(V) 3.6 %(V) at 20 °C (68 °F) 0.85 g/cm3 at ca.20 °C (68 °F) 51.
PAGE 5
Material Safety Data Sheet Product name: Killer Cans 2-methoxy-1-methylethyl acetate Product Code: KC 108-65-6 Date: 01/01/2012 Acute oral toxicity: LD50 mouse Dose: 8,532 mg/kg Acute dermal toxicity: LD50 rabbit Dose: 7,500 mg/kg Eye irritation: Classification: Irritating to eyes. Result: Mild eye irritation Butane 106-97-8 Skin irritation: Classification: Irritating to skin. Result: Skin irritation Eye irritation: Classification: Irritating to eyes.
PAGE 6
Material Safety Data Sheet Product name: Killer Cans Product Code: KC EmS Number Marine pollution Date: 01/01/2012 : F-D S-U : no SECTION 15: REGULATORY INFORMATION OSHA Hazards : TSCA Status DSL Status SARA 311/312 Hazards : : : Flammable Aerosol Moderate skin irritant Moderate eye irritant On TSCA Inventory All components of this product are on the Canadian DSL list.