Instructions / Assembly

9. Clean up your equipment after using Paint Wrap with water. (Warm water works better).
10. For the first two to three weeks, wipe clean with a damp cloth.
11. Do not use any household or automotive cleaners containing alcohol, solvent, or ammonia to
clean the car or part.
12. After 2 to 3 weeks you can take your car through a normal car wash.
13. Coating should be checked for adhesion every 2 months.
Paint Wrap Removal Guide
1. Ambient Temperature should be 70°F to 80°F.
2. Start by removing the edges with your fingernail, or anything that will get up under it.
3. Once you lift up the edge, try to make a film, and take it off in big sheets.
4. If you feel that it is hard to remove you can use a hair dryer or heat gun to warm it up and
release the film from the surface (be patient).
5. After removing all the Paint Wrap material, you can wash the car as you would normally do.
6. If you leave Paint Wrap on for over 6 months, and too much adhesion occurs, re-coat it again
with Paint Wrap and it will be ready to come off easily.