MSDS

PAINTSHIELD 5720
SECTION VI - REACTIVITY DATA
STABILITY
UNSTABLE
CONDITIONS TO AVOID: Excessive heat.
STABLE
X
INCOMPATIBILITY: STRONG OXIDIZING AGENTS
HAZARDOUS DECOMPOSITION PRODUCTS: May produce oxides of carbon or nitrogen.
HAZARDOUS
POLYMERIZATION
MAY OCCUR
CONDITIONS TO AVOID
WILL NOT
OCCUR
X
SECTION VII - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dike and contain spill with inert material (sand, earth, etc). Transfer
liquid and solids to containers for recovery or disposal. Spill emulsion is very slippery. Avoid falls.
WATER DISPOSAL METHOD: In accordance with state, local and federal requirements
SECTION VIII - SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: NIOSH approved if needed.
VENTILATION
LOCAL EXHAUST:
NOT REQUIRED
SPECIAL:
MECHANICAL:
NOT REQUIRED
OTHER:
PROTECTIVE GLOVES: Impervious.
EYE PROTECTION:
SAFETY GLASSES
OTHER PROTECTIVE EQUIPMENT:Chemical apron, safety shower.
SECTION IX - SPECIAL PRECAUTION
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:Store in cool dry place. Avoid freezing, minimize contact with air to prevent
bacterial growth.
OTHER PRECAUTIONS:NONE
DATE ISSUED: December 31, 2011
Information presented herein has been complied to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not
guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product violation of any patent or in violation of any
law or regulation. It is the user's responsibility to determine for him/herself the suitability of any material for a specific purpose and to adopt such
safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions of use are
not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.