Instructions / Assembly

PAPER SHADE FLOOR LAMP
Model Number 19204-000
reduce the risk of electric shock; this lamp has a
polarized plug (one blade on the plug is wider than
the other blade). The plug will fit in a polarized outlet
only one way. If the plug does not fit fully into the
outlet, reverse the plug and insert again. If the plug
still will not fit into the outlet; contact a qualified
electrician. Do not force the plug into the outl
et.
Never use an extension cord unless the plug can be
fully inserted.
Do not alter the plug in any manner.
2
. . Do not install non-factory wiring or any other
electrical components. Altering or modifing the
lamp in any way will render the product unsafe.
3. To avoid cut
ting or damaging the co rd and wire
never
place objects directly over the power
supply cord..
BULB REPLACEMENT
Use One 100 Watt, Type E-26, A-19 incandescent bulb.
(Bulb not included).
DO NOT EXCEED MAXIMUM BULB WATTAGE.
DO NOT USE A HALOGEN BULB WITH THIS LAMP.
Halogen bulbs operate at higher temperatures and pose
a fire hazard.
CLEANING AND MAINTENANCE
1. To clean: use a soft, dry cloth only.
2. Do not use chemical or abrasive cleaners.
For Customer Service assistance:
www.evolutionlightingllc.com
MADE IN CHINA
IMPORTANT SAFETY INSTRUCTIONS
4. Keep curtains, shades, wall hangings and all other
fabrics and objects away from the lamp shade, light
switch and the light bulb. Lamps are not designed to
support additional weight. Do not hang any objects
from the lamp or any lamp part.
5. Place the lamp on a stable, level surface in area
where the lamp will not be tipped over or bumped.
6. This lamp is approved for indoor use only.
2.
Light bulb should never touch the shade.
Read and Save:
To
1.
1. Turn off and unplug lamp and allow the bulb to
cool before replacing bulb.