Instructions / Assembly

ManualsBrandsAlsy ManualsLighting1-Light Bronze Wall Sconce

IMPORTANT SAFETY INSTRUCTIONS

20530-001

1-LIGHT WALL SCONCE

For Customer Assistance:

www.evolutionlightingllc.com

Made In China

Read and Save:

1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components.

Altering or modifying the lamp in any way will render the lamp unsafe.

2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and light

bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part.

3. Before starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse

at the fuse box. Turning off the power at the light switch is not sufficient to prevent electrical shock.

4. This unit is suitable for damp locations.

5. Electrical Connections: All electrical connections must be in accordance with local codes, ordinances and the National

Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified,

licensed, electrician.

6. This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.

7. Tools and Materials Required: (Not Included) Flathead screwdriver, wire cutters, ladder, pliers,

U.L./CSA listed electrical tape.

LIGHT BULB REPLACEMENT

1. Uses one 60 Watt Type B Incandescent Bulb or CFL or LED equivalent (not included)

2. DO NOT EXCEED RECOMMENDED WATTAGE.

3. Turn off the unit and allow the bulb to cool before touching.

4. Light bulb should never touch the lamp shade.

CLEANING AND MAINTENANCE

1. Clean using a mild cleaning solution and a soft cloth.

2. Never use a rough cloth or chemical cleaners containing acids, abrasives or solvents.

Summary of content (5 pages)

PAGE 1
20530-001 1-LIGHT WALL SCONCE IMPORTANT SAFETY INSTRUCTIONS Read and Save: 1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components. Altering or modifying the lamp in any way will render the lamp unsafe. 2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and light bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part. 3.
PAGE 2
Installation 1 Installing the mounting bracket Carefully unpack and lay all parts on a clean, level surface. Unscrew the canopy nuts (C) from face plate (A) and detach the mounting bracket (B). Attach the mounting bracket (B) to the junction box (not included) with junction box screws (AA). NOTE: The preassembled screws from the mounting bracket should be in a horizontal position. 2 Making the electrical connections NOTE: Make the connections to a 120V AC 60Hz circuit.
PAGE 3
20530-001 LÁMPARA CON UNA LUZ PARA MONTAJE EN LA PARED INSTRUCCIONES IMPORTANTES DE SEGURIDAD Leer y conservar: 1. Para reducir las posibilidades de incendio o descarga eléctrica: No instale cableado eléctrico u otros componentes eléctricos que no vengan de fábrica con esta lámpara. Si esta lámpara es alterada o modificada, su seguridad se verá comprometida. 2.
PAGE 4
Instalación 2 Conexiones eléctricas 1 Instalación del soporte de montaje Desembale con cuidado todas las piezas y colóquelas sobre una superficie limpia y pareja. Destornille las tuercas de la cubierta (C) de la placa delantera (A) para separar el soporte de montaje (B). Ajuste el soporte de montaje (B) a la caja de empalme (no incluida) con los tornillos de la caja de empalme (AA). NOTA: Los tornillos previamente ajustados al soporte de montaje deberían estar en posición horizontal.
PAGE 5
Consumer Service Service d’aide aux Consommateurs Servicio al Consumidor http://www.evolutionlightingllc.com LIMITED WARRANTY EVOLUTION LIGHTING warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of original purchase. Electronic parts including passive infrared devices, photoelectric switching mechanisms, and light bulbs provided with Evolution Lighting products are warranted for 30 days from the date of original purchase.