Instructions / Assembly

For Customer Assistance:
www.evolutionlightingllc.com
Made In China
1
Preparing the unit for installation
2
Installing the mounting bracket
3
Making the electrical connections
Carefully unpack and lay all parts on a clean, level
surface.
Install the mounting bracket (A) to the junction box (not
included) with two junction box screws (AA).
4
Installing the xture assembly
Installation
Make the connections to a 120V AC 60Hz circuit.
NOTE:
A
AA
Make electrical connections using wire connectors (BB).
Refer to ELECTRICAL CONNECTIONS in the Safety
Information section on page 2.
Place the xture assembly (B) against the mounting
surface, allowing the preassembled screws on mounting
bracket (A) to pass through the xture assembly (B).
Secure with previously removed canopy nut (C).
BB
A
C
B
Unscrew the preassembled canopy nut (C) from
the mounting bracket (A).
C
A