Installation Instructions
Table Of Contents
- Wireless specifications
- Pin out diagram
- Mechanical layout
- Recommended footprint layout
- Yanzi stamp radio module images
- Electrical specifications
- Power supply recommendation
- Operating and storage requirements
- Antenna specifications
- 2.4 GHz chip antenna S-parameters and radiation patterns
- Layout and general design recommendations
- Host Product verification and testing
- Certification and compliance information
Date: 2022-06-13 Doc No:890-07082-Yanzi-stamp-user-manual
Copyright © 2022 Altacogni AB. All rights reserved. Yanzi is a brand of Altacogni AB
Altacogni AB,
C/O nordomatic, Arenavägen
27, Johanneshov, Sweden
Info@altacogni.com
www.yanzinetworks.com
Doc rev No: 1.1
Model: VAI1-0004, Rev: R1B
Page: 15
Host Product verification and testing
The host product must be designed to be integrated with Yanzi system using Yanzi
proprietary firmware stack (IEEE 802.15.4 + IPV6).
The label on the host product must include the 8-digit alpha-numeric EUI64 printed on the
Yanzi stamp in the form of a plain text and a QR code.
For functional testing of the host product, one will require a Yanzi Gateway connected to an
active internet connection using an ethernet port on the gateway. The testing of the new host
product/sensors can be done using Yanzi Lifecycle portal on live.yanzi.cloud . Using life
cycle tool one can discover and pair the host product/sensors to the gateway using the
unique EUI64 code engraved/adhered on Yanzi stamp module. Upon sccessful pairing the
host sensor should start transferring data with the Yanzi Gatway each activity cycle (usually
every 2 minutes). For more deatils on the installation and Yanzi Lifecyle tool please refer to
”installation-manual-890-03084-smart-office-en.pdf” document also available at
yanzi.dev/user-manual/.