Installation Instructions
Table Of Contents
- Wireless specifications
- Pin out diagram
- Mechanical layout
- Recommended footprint layout
- Yanzi stamp radio module images
- Electrical specifications
- Power supply recommendation
- Operating and storage requirements
- Antenna specifications
- 2.4 GHz chip antenna S-parameters and radiation patterns
- Layout and general design recommendations
- Host Product verification and testing
- Certification and compliance information
Date: 2022-06-13 Doc No:890-07082-Yanzi-stamp-user-manual
Copyright © 2022 Altacogni AB. All rights reserved. Yanzi is a brand of Altacogni AB
Altacogni AB,
C/O nordomatic, Arenavägen
27, Johanneshov, Sweden
Info@altacogni.com
www.yanzinetworks.com
Doc rev No: 1.1
Model: VAI1-0004, Rev: R1B
Page: 3
Wireless specifications
Wireless low power high density network
• 2405MHz to 2480MHz (2.4GHz), 250kbps, QPSK, IEEE 802.15.4 compliant
IPv6 Sensor network with mesh technology
• Modulation QPSK, sensitivity: -85dBm, CCA threshold -75dBm
• Supported channels 11 to 26, channel width 5000KHz
• Wireless Output Power 0dBm to 10 dBm*
• Wireless Range 5 to 25m indoor, (Indicative) **
• Omnidirectional PCB mount chip antenna with 2.2dBi gain
Wireless low power long range network
• 863MHz to 870MHz (868MHZ Europe), 50kbps, 2-GFSK, IEEE 802.15.4g
compliant, ETSI Standard, IPv6 sensor network.
• 902MHz to 928MHz (915MHz North America), 50kbps, 2-GFSK, IEEE
802.15.4g compliant, ARIB Standard, IPv6 sensor network
• 868MHz channel width 25KHz, 915MHz channel width 200KHz
• Sensitivity -109dBm, CCA threshold -82dBm
• Wireless Output Power 0dBm - 14dBm*
• Wireless Range 50 to 100m indoor (Indicative) **
• U.FL/IPEX external antenna connector
* Actual output power depends on regional regulations
** Actual range depends on walls, obstacles, radio disturbances, etc.