User's Manual

Quick Setup Guide

5. Connect with Cloud-based controller – AltaiCare

Network Scenario:

Note: For AltaiCare support, A2c should operate in Switch Mode (Section 3).

1. Users can manage their A2c and set up their hotspot service for

subscribers with AltaiCare, which is a cloud-based system.

2. Go to Configuration > Network > General. Make sure A2c can reach

Internet and communicate with AltaiCare by inputting valid IP settings

either via DHCP or with Static IP configuration. Google Public DNS Server

can be considered, e.g. 8.8.8.8 or 8.8.4.4 if you are not sure about the ISP

DNS’s Server IP.

A2c_1 (AP)

A2c_2 (AP)

Local Gateway/Router

ISP Modem