User's Manual

Quick Setup Guide

P2.6*10 Screw

Clip

Wall

Mounting Screw

Mounting Bracket

P2.6*12 Screw

P3.5*32 Screw

Mounting Options

Option 1: Ceiling Mount – Mounting bracket

1. Attach the mounting bracket to the ceiling using the provided mounting

screws and long screws (P3.5*32).

2. Insert the provided short screws (P2.6*12) into the bottom cover of A2c.

Make sure that the screws are exposed enough to attach the mounting

bracket.

3. Install the A2c on the mounting bracket by rotating the unit clockwise

about 90 degrees to secure it in place.

Option 2: Ceiling Mount - T-Rail clips

1. Attach the small T-Rail clips to the bottom cover of A2c using the provided

short screws (P2.6*10).

If extra space is required, use the provided spacers and large T-Rail clips

with long screws (P2.6*25).

2. Line up the connected T-Rail clips with an appropriately sized rail and

press the unit onto the rail until it snaps into place.

Lock A2c by revolving

P2.6*25 Screw

Clip

Spacer

T-Rail

Clips