User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc
Commercially Confidential
32
4.11.9 Advanced Radio Setting
More radio parameters can be verified and altered by selecting the Advanced icon in the field of
Advanced Setting. The parameters are shown in Figure 25. The following table showed is the
best suggested interval worked with the current operated APs. Note that it is not suggested to
change the parameters in Advanced Radio Settings unless you are experienced administrators.
Number of active
VAPs
Auto Beacon Interval
(ms)
1 100
2 150
3 150
4 200
5 200
6 240
7 280
8 320
9 360
10 400
11 440
12 480
13 520
14 560
15 600
16 640
Table 4 Beacon Interval Table
Fragment Threshold: It means the size of each frame. If it is set to 256 bytes and the size of data
block is 1024 bytes, the data block will be divided to four frames to send.
RTS/CTS Threshold: RTS is a flow control mechanism to prevent collision between 802.11b
and 802.11g mobile stations to send data to the access point in the same time. CTS is another
flow control mechanism to prevent collision when two mobile stations, who do not know the
existence of each other, send data to the access point in the same time. RTS and CTS are used
for point-to-multipoint bridge application and they are enabled when the threshold set to 2346.