User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc
Commercially Confidential
33
Figure 25 Advanced 2.4GHz Radio Setting
4.12 S YSTEM L OG
C1 Super WiFi CPE supports event logs for diagnostic purpose. The System Log can be
chosen under the System Log in the menu bar. Administrator can classify system log by
configuring digit of Kernel Log Level. The following from lists Kernel log level which is
presented by digits.
Digit Kernel Log Level
0 KERNER_EMERG
1 KERNER_ALERT
2 KERNER_CRIT
3 KERNER_ERR
4 KERNER_WARNING
5 KERNER_NOTICE
6 KERNER_INFO
7 KERNER_DEBUG
Table 5 Kernel Log Level
System Log allows C1 sending system log messages into a System Log server instantaneously to
the IP address of the System Log Server. Administrator could choose either Local System Log
Server or Remote System Log Server. When System Log To Local is enabled, the system
message is send to Local System Log Server and listed on the Web-Admin Interface. Click the
Browser button will load the system messages stored in the AP buffer. By typing remote
System Log server IP address in System Log to Remote IP field, C1 will send System messages
to remote server.
NOTE: All event logs will be lost after A8 is rebooted.