User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc
Commercially Confidential
12
12. Click on the “Altai Wireless Network”
Figure 6 Showing Available Wireless Network Connections in Windows XP
3.2 C HECK A CCESS
“ping” utility of DOS mode is a handy tool to check the access to the A3 smart WiFi.
1. Go to DOS mode by typing “cmd” in “Run”.
2. Type command:
ping 192.168.1.20
The A3 smart WiFi shall respond to your ping request if it has a correct connection with
your PC.
NOTE: Using the same PC to ping different A3 smart WiFi may cause ping failure. This is
because the A3 smart WiFi APs have the same default IP address but different MAC addresses.
You need to type a command “arp –d” in DOS mode to clear ARP table on PC before each
ping.