User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc
Commercially Confidential
16
The User Name and Password for login are mentioned in Section 4.1, but only password can be
changed by entering a new string in the field of Password. Note: it is need to re-enter to
confirm the password. Please press Change Password button to store the new password.
The System Name is the name of the A3 smart WiFi.
NOTE: Click the Update icon to store the changed settings.
4.4 NTP C ONFIGURATION
NTP is a network time protocol for the AP to synchronize the system time. There is no NTP
server IP address by default. If NTP is needed, IP address of the NTP server must be added and
A3 will synchronize with the NTP server. This measure is useful to maintain the network and
make sure all APs using the same system time by setting the same NTP server.
Figure 9 NTP Configuration
NOTE: Click the Update icon to store the changed settings.
4.5 SNMP C ONFIGURATION
In the SNMP Manager, the administrator can change the Read Community and Write
Community. Access Subnet IP and Access Subnet Mask can be configured to specify the
A3’s SNMP Manger. Notification Server IP addresses can be added for SNMP control. They
are parameters used for SNMP control between Altai A3 and AWMS system.
By enabling SNMP Manager ACL mode, the A3 will only be managed by the AWMS which IP
is located in the ACL list with correct Read Community, Write Community and SNMP IP