User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc

Commercially Confidential

4.9.2 LAN Configuration

In Gateway Mode, the A3 can be a DHCP server, a DHCP relay or none of them.

When the DHCP Server Mode sets to Server, the A3 will act as a DHCP server and use the

settings specified in the field Start IP Address, Maximum Number of DHCP Users and DNS to

serve the wireless clients.

1. Configure the Local IP Address and Subnet Mask Length. Local IP Address is the

gateway IP address for the client who associates A3 smart WiFi. Only the clients under

the same subnet of local IP address can get IP address from A3 smart WiFi.

2. Configure the Start IP Address, Maximum Number of DHCP Users, and DNS, see

Figure 14.

3. Reboot the A3

Figure 14 Configure DHCP Server

When the DHCP Server Mode sets to Relay, the A3 will redirect all DHCP requests from the

wireless clients to a backend DHCP server with IP address specified by the Relay Server IP

Address.

1. Configure the Relay Server IP Address, see Figure 15.

2. Reboot the A3