User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc
Commercially Confidential
39
Figure 30 A3 smart WiFi Access Point is Rebooting
4.17 R ESTORE C ONFIGURATION TO D EFAULT S ETTING
The choices of factory default can be chosen by selecting Factory Default under
Administrations in the menu bar.
The default settings (IP Address, Subnet Mask, Default Gateway Address and Remote
Bridge Configurations are retained) can be restored by selecting the icon Reset to Factory
Default (address retained) or Reset to Factory Default, as shown in Figure . Please reboot the
A3 smart WiFi afterwards.
Note: after resetting to factory default without address retained, please type
<https://192.168.1.20> to open A3 smart WiFi web-admin.
Figure 31 Reset to Factory Default Setting in Web-admin