User's Manual

Altai A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point

Installation Guide

2.7. Power over Ethernet (PoE)

Refer to the following diagram for installing the components by using

PoE to power the A3-Ei.

Figure 13 - Installation components for a PoE installation

Note:

 AC power cord, Ethernet cable, and PoE cable are not provided

in the package

 Ethernet cable and PoE cable should be CAT 5e or above

 Maximum length of Ethernet cable and PoE cable must be less

than (<) 100m

PoE Injector Connection:

Port on PoE Injector

Connect to

Data In

Backhaul link, computer or peripherals

Data & Power Out

A3-Ei Ethernet Port

Caution: Make sure cables are connect to correct ports of the PoE to avoid

electrical damage to peripheral Ethernet port!