User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Installation Guide

Mounting A8n (ac) and A8in (ac) on Pole

1. Assemble the mounting kit according to Figure 12 with one side

of the screw installed.

2. Mount the kit to the pole at the desired height and tighten all 4

screws to fix its position (Figure 13).

3. The mounting kit must be installed with the key hole pointing

direction (Figure 14).

4. Clamp the unit to the mounting kit, as shown in Figure 15 and

make sure the mounting screw is locked in the key hole.

5. Screw in 4 locking screw to secure A8in (ac) with the mounting

kit (Figure 15).

6. The mounting kit will fit with pole diameter from 1 inch to 3

inches.

Figure 12 Mounting kit assembly

Figure 13 Completion of Mounting

Figure 14 mounting screw locking direction

Figure 15 Clamping and secure the unit on

pole