User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Installation Guide

Cable connection from A8n (ac) to 2.4GHz panel

antenna

1. Connect RF cable from panel antenna port to A8n (ac) 2.4GHz RF port at

the top of A8n (ac).

2. RF port 1 and 2 of A8n (ac) must connect to the same panel antenna.

The same for ports (3.4), (5,6) and (7.8) which each pairs must connect to

the same panel antenna. It is recommended to connect the A8n (ac)

port to antenna port according Figure 20 mapping.

3. It is recommended to seal the A8n (ac) series 2.4GHz antenna RF ports

with weatherproof materials to get the best performance according to

the procedure in chapter 6 of this document.

Figure19. RF cable connection from panel antenna