User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Installation Guide

1. Cut the butyl rubber tape into 1/5” (5mm) by 4” (100mm) strips.

2. Wrap a strip of butyl rubber tape around the base of each antenna

port in the clockwise direction. Take extra care to make sure that

the resulting butyl rubber ring would not hinder the tightening of the

RF cable connector around the antenna port.

Figure 27. Wrap the Butyl Rubber Strip

Figure 28. Butyl Rubber Ring Finished

Connecting RF Cables

1. Make sure each RF cable and its connectors are absolutely dry.