User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Installation Guide

antenna RF port junction is tightly sealed. Press the tape edges

together so that there are no gaps. Press the tape against the RF

cable connector body and the A8n (ac) series 5GHz antenna RF

port.

3. Start wrapping a layer of electrical tape 1” (25mm) below the butyl

rubber tape, overlapping at half-width. Finish the wrap at the base

of the A8n (ac) series 5GHz antenna RF port and cut the tape.

Repeat this process for a second layer, and if enhanced UV

protection is required, a third layer.