User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Installation Guide

Introduction

This guide is designed to provide the information needed to mount A8n

(ac) Series Super WiFi Base Station (BTS) at the site location. A8n (ac)

series contains 3 variants:

i) A8n (ac): contains A8n (ac) base station plus 4 external 2.4GHz

14dBi sector antennas. Each sector antenna can be adjusted

with different directions and tilt angles.

ii) A8-Ein (ac): integrated base station, multi-beam 2.4GHz 19dBi

antenna array for 80 degree sector coverage.

iii) A8in (ac): integrated base station, 14dBi antennas and RF

cabling optimized for long range 360-degree access coverage.

It is assumed in this document that a site survey has been performed

before the site installation. The appropriate antenna pole and BTS

locations have been selected. It is a good practice to have a

document consists of a map and drawing illustrating the base station

and poles locations, antenna bearing/down-tilt, antenna height, etc…

A planning on IP network is also an important issue for network

planning.