User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

Note:

- Country code enforces regulatory restrictions on radio

frequencies and maximum transmission power that the AP

can operate in.

Wireless Mode – Select suitable Wi-Fi operating mode for the AP;

2.4G 11Mbps (802.11 b)

2.4G 54Mbps (802.11 bg)

2.4G 54Mbps (802.11 g-only)

2.4G 144Mbps (802.11 ng HT20); Default Setting

2.4G 144Mbps (802.11 n-only HT20)

2.4G 300Mbps (802.11 ng HT40+)

2.4G 300Mbps (802.11 n-only HT40+)

2.4G 300Mbps (802.11 ng HT40-)

2.4G 300Mbps (802.11 n-only HT40-)

Legacy 11b Data Rate Support [Optional] – Select a suitable option

for the legacy client compatibility. In order to enhance the

spectrum efficiency, low data rates (1/2/5.5/11M) should be

eliminated. The options include:

1/2/5.5/11M (Best compatibility

/Poor performance)

All legacy clients will be supported

5.5/11M (Good compatibility

/Good performance)

Clients only capable of 1/2Mbps will

not be supported

Disable All (Poor compatibility/

Best performance)

Clients only capable of 802.11b

standard will not be supported

Note:

- 2.4G 11Mbps (802.11 b) is not applicable.

Radio Frequency – Choose the operating channel for the radio

interface; AP selects the channel with the least amount of

interference if Auto is selected. An optional feature Periodic Auto

channel Selection will be shown if Auto is selected. 2412MHz

(Channel 1) is the default setting

Note:

- Select the radio frequency based on the result of channel

scan is recommended

Transmission Power – Select the total transmission power for the

radio interface.

Maximum Client – Specify the maximum associated client between

1 and 512 that the radio interface serves. 512 is the default setting.