User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

Disable HT20/HT40 Auto Switch [Optional] – If select the checkbox,

AP will NOT switch the channel width between 20 MHz and 40 MHz

automatically. This option is only available if any wireless mode with

HT40+/- is selected.

User Isolation in different WLAN (SSID) [Optional] - Select the

checkbox to block the users’ communication across different SSID in

the AP directly.

Periodic Auto Channel Section [Optional] – Select the checkbox to

enable a scheduled channel selection task on the radio interface.

Schedule Mode

Select exact time and day(s) for selecting radio

frequency for the interface

Periodic Mode

Select a countdown timer (minute) for selecting radio

frequency for the interface; 0 denotes disable.

Range Optimization [Optional] – Select a coverage range for

optimization. ‘Auto’ is the default value.

Sector Power Control [Optional] – Select the checkbox to enable a

feature to assign a transmitting power for each sector.

5. Click Submit

6. Click Save & Apply