User's Manual
47
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
4.2.6. Configure AP as IP Gateway
Figure 46 – Gateway Settings
1. Go to Configuration > Network > General
2. Select Gateway in Network Setting
3. Change the followings on WAN setting:
Internet Connection Type – Set AP as a client with fixed IP address or
DCHP client:
Static
Stand for Static IP addressing; AP will not update its IP
address automatically
DHCP Client
Require an IP address from DCHP server on the network;
AP renews its IP address periodically
IPv4 Address – Type in an IP address for AP (Static Internet
Connection Type only)
IPv4 Subnet Mask – Type in a subnet mask for AP (Static Internet
Connection Type only)
IPv4 Default Gateway – Type in an IP address of default gateway for
AP (Static Internet Connection Type only)
IPv4 DNS Server – Type in one or more DNS server for AP (Static
Internet Connection Type only).
4. Change the followings on LAN setting:
LAN IP Address – Provide an IP address on LAN interface of device
LAN IP Address Subnet Mask – Provide a subnet mask on LAN
interface of device
5. Assign enabled interfaces into WAN group or LAN group in
WAN/LAN Interface Assignment; all interfaces in the same group
work as bridge
6. Select Enable NAT Mode to enable NAT in AP [Optional]
7. Click Submit
8. Click Save & Apply