User's Manual
55
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
Advanced Settings
Configure AMPDU and AMSDU on radio interface
Figure 58 – AMPDU and AMSDU Setting
1. 2.4G Radio: Go to Configuration > Wireless > Radio0 > Advanced >
Advanced Settings
5G Radio: Go to Configuration > Wireless > Radio1 > Advanced >
Advanced Settings
2. Select AMPDU checkbox to enable aggregation of MAC protocol
unit
3. Type in the maximum number of data frame between 1 and 64 that
A8n (ac) pushes them into single PPDU; 64 is default setting
4. Select AMSDU checkbox to enable aggregation of MAC service
data unit; A8n (ac) pushes aggregated MSDU (MAC service data
units) into a single MPDU
5. Click Submit
6. Click Save & Apply
Configure the number of transmit radio chains and receive radio chains
Figure 59 – transmit radio chains and receive radio chains setting
1. 2.4G Interface: Go to Configuration > Wireless > Radio0 > Advanced
> Advanced Settings
5G Interface: Go to Configuration > Wireless > Radio1 > Advanced >
Advanced Settings
2. Select the maximum number of transmission between 1 and 2 on
Max Tx Streams
3. Select the maximum number of transmission between 1 and 2 on
Max Rx Streams
4. Click Submit
5. Click Save & Apply
Configure beacon interval of BSS
Figure 60 – Beacon Setting
1. 2.4G Interface: Go to Configuration > Wireless > Radio0 > Advanced
> Advanced Settings
5G Interface: Go to Configuration > Wireless > Radio1 > Advanced >
Advanced Settings