User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

5.2. SNMP

Simple Network Management Protocol (SNMP) is a Network

management protocol used almost exclusively in TCP/IP networks.

SNMP provides a means to monitor and control network devices, and

to manage configurations, statistics collection, performance, and

security.

Figure 69 – SNMP Configuration

5.2.1. Enable SNMP in A8n (ac) products

1. Go to Administration > User Admin > SNMP

2. Select Enable SNMP checkbox to enable SNMP function

3. Type in suitable string in Read Community; the string of Read

Community between Network Manage System (NMS) and A8n (ac)

must be identical, otherwise, NMS cannot get information from A8n

(ac). public is default setting.

4. Type in suitable string in Write Community; the string of Write

Community between Network Manage System (NMS) and A8n (ac)

must be identical, otherwise, NMS cannot modify A8n (ac)’s setting.

netman is default setting.

5. Click Submit

6. Click Save & Apply

Note:

- A8n (ac) support up to four trap host at the same time. The

information about trap hosts will be listed in the trap host table

(see Figure 70)

Figure 70 – Trap host table