User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

2.3. Login the AP (via Ethernet)

1. Verify the AP’s Power LED is steady green

2. Open a Web browser from the computer.

3. Type http://192.168.1.222 in the address bar or location bar (see

Figure 3).

4. Type admin (default username) in Username

5. Type admin (default password) in Password

6. Click Login

Figure 3 – A8n (ac) Series Product’s Login Page

2.4. Secondary IP Address of A8n (ac) Series

Products

The default IP address of A8n (ac) series products is 192.168.1.222/24.

A8n (ac) series products support a fixed IP address on the Ethernet

connection called Secondary IP Address. This secondary IP address is

192.168.99.x/24 where x denotes as the decimal value of the last byte

of the Ethernet MAC address on the access point.

Example 1:

Device Ethernet MAC address: 00:19:BE:20:03:8C

Secondary IP Address of this device:

192.168.99.140 (8C (HEX)  140 (DEC))

The secondary IP address uses IP range from 192.168.99.5/24 to

192.168.99.254/24. The rest of IP addresses are reserved. If the last byte

of a MAC address matches any of the reserved IP addresses, the

supported device shall follow the MAC to IP address mapping shown in

Table 3: