User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

4.1. Basic Configurations

This section covers the basic configuration on A8n (ac) Series products.

4.1.1. Synchronize AP’s system clock with NTP

server

Figure 15 – NTP Setting

1. Go to Configuration > System

2. Change the following settings:

NTP Server IP – Type in either the domain name / IP address of NTP

server which you want to synchronize with.

NTP Polling Interval – Type in the interval in second between each

synchronization request from the AP to NTP server. The default

setting is 600 seconds

NTP Time Zone – Select the appropriate time zone. The default

setting is Asia/Hong Kong

Daylight Saving Time – Select the checkbox if your place has

daylight saving time

3. Click Submit

4. Click Save & Apply

Note:

- IP Address Type is changed by AP automatically based on

whether IPv6 is enabled or not

- If providing NTP server’s domain name in NTP Server IP, you

must provide valid DNS server information (see 4.1.2 on page

15 for more detail). Otherwise, NTP setting cannot take effect.