User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

4.1.2. Assign Internet Connection Type for AP (IPv4)

– Static / DCHP

Figure 16 – WAN Settings (IPv4)

1. Go to Configuration > Network > General > WAN Settings

2. Change the following settings:

Internet Connection Type – configure AP either as a client with fixed

IP address or DCHP client;

Static

Stand for Static IP addressing; AP will not update its IP

address automatically

DHCP Client

Require an IP address from DCHP server on the network;

AP renews its IP address periodically

IPv4 Address –Type in an IP address for AP (Static Internet

Connection Type only)

IPv4 Subnet Mask – Type in a subnet mask for AP (Static Internet

Connection Type only)

IPv4 Default Gateway – Type in an IP address of default gateway for

AP (Static Internet Connection Type only)

IPv4 DNS Server – Type in IP address of one or more DNS server for AP

(Static Internet Connection Type only).

Note:

- Click for adding more DNS;

- Click to remove existing DNS server entry

3. Click Submit

4. Click Save & Apply