User's Manual

34
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
Configure WLAN with Shared Key Authentication (see Configure
WLAN with Shared Key Authentication on page 24)
Configure WLAN with WPA / WPA2 / WPA-auto Authentication (see
Configure WLAN with WPA / WPA2 / WPA-auto Authentication on
page 25)
Configure WLAN as with WPA-PSK / WPA2-PSK / WPA-auto-PSK
Authentication (see Configure WLAN with WPA-PSK / WPA2-PSK /
WPA-auto-PSK Authentication on page 27)
Configure WLAN with WAPI Authentication (see Configure WLAN
with WAPI Authentication on page 28)
Configure WLAN with WAPI-PSK Authentication (see Configure
WLAN with WAPI-PSK Authentication on page 30)
4.1.4. Configure Radio Interface as Station
(STA/CPE)
Radio 0 – 2.4GHz Radio
Station radio mode is not available in Radio 0(2.4G)
interface.
Radio 1 – 5GHz Radio
Figure 32 – Radio 1 General Setting of Station
Radio General Configuration
1. Go to Configuration > Wireless > Radio1(5G) > General
2. Select Enable Radio checkbox to enable radio interface
3. Select Station in Radio Mode
4. Change the following settings: