User's Manual
42
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
4.1.5. Configure Radio Interface as Repeater
Radio 0 – 2.4GHz Radio
Repeater radio mode is not available in Radio 0(2.4G)
interface.
Radio 1 – 5GHz Radio
Radio General Configuration
Figure 40 – Radio 1 General Setting of Repeater
1. Go to Configuration > Wireless > Radio1(5G) > General;
2. Select Enable Radio checkbox to enable radio interface
3. Select Repeater in Radio Mode
4. Change the following settings:
Country Code – Select an option that matches your device’s
installation location; Hong Kong is the default setting.
Note:
- Country code sets the regulatory domain for maximum
transmission power that Repeater can use
Transmission Power – Select the total transmission power for the
radio interface.
Maximum Client – Specify the maximum associated client between
1 and 512 that the radio interface serves. 512 is the default setting.
Enable Inter-WLAN User Isolation - Select the checkbox to block the
users’ communication across different SSID in the AP directly.
5. Click Submit
6. Click Save & Apply