User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

4.2.9. VLAN

VLAN is layer-2 network domain that may be partitioned to create

multiple distinct broadcast domains, which are mutually isolated so

that packets can only pass between them via one or more routers.

Note:

- VLAN can be enabled on Switch mode ONLY

Figure 49 – VLAN Settings

Enable VLAN

1. Go to Configuration > Network > VLAN

2. Click Submit

3. Go to Configuration > Network > VLAN > VLAN Profiles

Figure 50 – VLAN Setting – Create VLAN

4. Click Add VLAN to create new VLAN

5. Change the following settings:

VLAN ID – Type in an identification number that represents a VLAN

IPv4 Address – Type in IP address for the VLAN

IPv4 Subnet Mask - Type in subnet mask for the VLAN

Enable STP Mode – Select the checkbox to enable STP on VLAN

6. Click Submit

7. Select a desired VLAN as Management VLAN

8. Click Submit