User's Manual

51
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
4.2.10. DHCP
A8n (ac) series products have built-in DHCP server; it can dynamically
distribute network configuration parameters to the connected end
devices on all LAN interfaces.
Note:
- DHCP server is available on Gateway mode ONLY
Figure 52 – DHCP Server Setting
Enable DHCP server
1. Go to Configuration > Network > DHCP
2. Select Server Mode on DHCP Server
3. Click Submit
4. Click under Detail of each pool
Figure 53 – DHCP Server – Address Pool Setting
5. Select Enable Pool check box
6. Type in IP address on Start IP Address
7. Type in IP address on End IP Address
8. Specify lease time between 60s and 604800s in Default Lease Time;
86400s is default setting
9. Click Submit
10. Click Save & Apply