User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

Sector X AP List Tab– displays information scanned WLAN in sector 0 – 4.

X is the sector number. Information includes SSID, BSSID, authentication

Mode, cipher, channel, rate in kbps, and received SNR (dB)

7.1.1. Perform channel scan on 2.4G radio

1. Go to Tools > Channel Scan > Radio 0 (2.4G)

2. [Optional] Provide channel scan interval from 100ms to 1000ms in

Duration

3. Click Start Scan

4. Wait until Scan Status is changed from In Process to Success; it will

take for 20 seconds approximately

Note:

- Wi-Fi service will be interrupted during channel scan

7.1.2. Perform channel scan on 5G radio

1. Go to Tools > Channel Scan > Radio 1 (5G)

2. [Optional] Provide channel scan interval from 100ms to 1000ms in

Duration

3. Click Start Scan

4. Wait until Scan Status is changed from In Process to Success; it will

take for 20 seconds approximately

Note:

- Wi-Fi service will be interrupted during channel scan

7.2. iPerf

A8n (ac) Series products embed iPerf server tool. Network Administrator

/ Engineer can test the throughput performance via Ethernet, Radio0,

or Radio1 with this built-in tool.

Figure 92 – iPerf Server Configuration