User's Manual
87
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
Figure 96 – Traceroute Test
How to perform traceroute test
1. Go to Tools > Diagnosis > traceroute
2. Type target IP address / host name in Destination IP Address/Host
Name
3. [Optional] Click Enable Resolve IP addresses checkbox to enable IP
address to domain name translation
4. [Optional] Specify timeout interval between 1s and 100s in Timeout
for traceroute test
5. [Optional] Specify TTL value between 1 and 100 in Pings Per TTL; 3 is
default setting
6. [Optional] Specify TTL value between 1 and 100 in Maximum TTL; 30
is default setting
7. Click Start
8. Click Stop to terminate ping test if necessary
7.3.4. Tcpdump
A8n (ac) provides a tool to capture packets that passing through a
particular interface. It helps network administrator for troubleshooting.
Figure 97 – Tcpdump Tool
How to perform packet capture on A8n (ac)’s interface
1. Go to Tools > Diagnosis > Tcpdump
2. Select suitable interface in Interface