ALTAIR AERIAL 818 Green Hornet SE 13g ‘This product supports GPS positioning and is commandeered for outdoor flight queenly Please confirm they your hoariness is compatible with 56 WiFi for an apfinealexpetienes. A This product Is sultana for users over 14 years oid. A Keep cigar of rotating espaliers. A Read all Instructions and safety guidelines carefully before use. mm battery recycling canter. Li-Po Battery Disposal & Recycling Do net dispose of unusable Lithium-Polymer batteries In household trash.
818 Green Hornet SE User Manual a Shop Altair « A Fermi Fricassee RC Company Based in inlet NE Scan this QR code to watch Instructional videos ta get started! We are a family-run business out of Lincoln, Nebraska, and want you to love our products as much as we do. Visa altairaerial.
Drone cover Propeller A Front LED Front LED (@teen} {Green) Bottom of .
Lillie ER Please charge the included battery before your first flight. Connect the charging cabal to the drone battery and then connect to a USB charging adapter. The charger indicator light will ba red when charging and will tum gran when fully charged. Input —— USB adapter (Not included) A Do wel ute « USD header whl more than 2A (gnus) pewee. Fla to de 30 can oats spontaneity damage your battery. & Sly charge the runs teary wih the deluded char play cabin.
Insert your SD Lard (not Included} Into the soot on the back of the camera. See graphic for SD Card orientation. NOTE: Wa recommend a Ci ass 10 3D Card, Max Size 32 6B n Camera Tito Dial Sett Stick {Press Down Right stick to Trim) Power Switch Rom Home GPS Switch HAL Speed Switch Following Mode Orbit Mode Phone Holder 1} Open the battery cover of the transmitter. 2) Insert each battery (not included) according to the electrode instructions inside.
Place your smartphones In the upper and lower clamps. Tho clamps wil secure your smartphones to the controller. * Phone ks «— not Included | (Pull down and out on the phonon lp located an the bottom of the corralled. * Phone Is nol Included! NOTE: Bo careful not fo clip ths power and velum battens on the side of your ph Flight Operation Instructions EC en LT The PUDDINGS app Is designed for smartphones Download and install the “PUDDINGS” app To using 10S and Android operating systems.
@ Pull the left stick to the lowest position ; . and let go. The indicator light on the @ Switch on te power to the transmitter. transmitter will flash slowly. The transmitter is now ready to pair with the drone. (3 Place the drone on a fiat surface and long-press the power button on top of the drone for 2 seconds. The drone LED lights wll flash and the transmitter will emit an audible confirmation sound when the transmitter and drone connect successfully.
abi After successful paling, the drone automatically begins searching for GPS Signals. Look for the blinking bite Indicator light on the transmitter to change from fishing to dolls bite. A salad blue Indicator light means GPS connection Is successful. if a GPS. connection Is nat successful, the drone will not fiy higher than 4 meters. Lad eee Push the eft and right sticks inward to a 45-degree angle simultaneously. @ The drone propellers begin to spin. Your drone is now ready to fly.
eT be HE HHO bring the drone back to the original take-off point, press the "Return Home Button® while hying. The transmitter will sound a confirmation beep, and the drone will automatically rectum home. NOTE: During the maturate, all right stick functions are unavailable. The di wst return to the before the right stick functions are allowed. To canal the return to home function, press the "Return Hume Bution® again.
GPS Is turned “On” by default. Switch GPS OFF: Crass the GPS switch on the transmitter. A confirmation beep will sound, and the bite Indicator light wii tum off. GPS Is now disabled. Switch GPS ON: Press the GPS switch on the transmitter to restart GPS, NOTE: @P$ can only ba switched ON/OFF when ths moor Is locked. Following Mode instructions NOTE: Following Mods is only available when the drone and your smartphone ars paired together.
Press the "HAL Speed Switch" button tn cycle through the three available speed modes. A set of ‘confirmation beeps will sound from the transmitter. Follow the guidance below to understand which speed mode Is enabled. High-Speed Mode: Three beeps Moth-Speod Mode: Two beeps Low-Spade Mods: Ons beep ‘TIP Use fis Information to determine which sped mode you should activate. Low: Speed Mode: Stabilize for beginners to traction without win, Med: Speed Mode: Stabbed for skied plots operating In a It breeze.
oi RE IRE EL EES Scroll the “Camera Tit Dla” to adjust the camera angle. Ting 807 to 0° Trim Adjustment Instructions Formosan Trim Adjustment: the den continues to move forward when Die, press down on the eft control sick and pull back on the right control stick until the drums na longer Moves forward when Kia. Backward Trim Adjust neat: If the dona continues ta move backward when Die, pass dawn an th eft control stick and push up on the right control stick uni the darns no longer moves backward when Idle.
3) Open the PUDDINGS app on your pane and select "Go Flying". You should now see video from the drone on your smartphone. NOTE: Your smartphone may ask for permission to access your photo library. You must approve theses permissions to enable several wreathes. RIPE For moral Information on tha User Interface and how to enable "Following Modal, "Custom Route Mode", and Orbit Mode" open the app and select "HELP" on the toolbar at the bottom of the screen. Next, select "APP Gilda" for detailed Instructions.
The Flight Control System will automatically rectum the drone to the take-off point If It senses the drone Is out of control. While returning to the take-off point, the drone does not have obstacle avoidance functionality, but the pilot can set the return attitude ta avoid ‘some obstacles on the way back. NOTE: These scenarios caa trigger the Oul of Control Protection Function The transmitter Is muted off. Flight distance exceeds the maximum controllable range.
FL Ll Parts Replacement Instructions Disassembly Prophesier: Erst, unscrew the propeller screw and then pull up on the prophesier to remove. Install Prophesier: Line up the prophesier hole with the motor hols and then press down on Install Propeller: Line up the propeller hole with tha motor gala the propeller to Install. Tights the and than pass down on tha propeller to Install, Instar the craw Scr 1 Cursors the propeller through both holes and then fight an ta sacra the propeller.
Drone Weight include battery): 230g Gigs: 225mm(Diagonal motor shaft spacing) Proper diameter: 147mm Fight attitude limo: 250m Fight time: About 15 mines {cam) GNUS: NONASSIGNABLE Operating frequency: 2.46hz/ 56 wi Transmitter Operation Frequency: 2 46hz Transmission distance: About 300m {0 Intolerance and barer-Tree outside) Mable devious bracket: Sublet for smartphones Baffle: 4x1 5AA APP App Name: PUDDINGS Image transmission system: WIR) 56Hz Real time Image transmission: 720 P@20 pss.
This equipment has been tested and found to comply with the limits for a Glass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
