Installation Manual For LED Mirror Cabinet www.altairdesignusa.
IMPORTANT SAFETY INSTRUCTIONS ① The mirror cabinet is very heavy,to avoid personal injury,please do not lift or install it alone. ② Before installing the product, to avoid personal injury caused by glass damage please check whether the product is broken . ① The internal partition of the mirror cabinet shall bear no more than 2KG per layer. ② The maximum current of the USB and the socket inside the mirror cabinet is 7A.
HARDWARE AND TOOLS USE AND MAINTENANCE Short press to turn on/off, and change the colors of light Long press to adjust the brightnes. ATTENTION: DO NOT lift the medicine cabinet from thedoor panels as it can damaged and/or break the mirrors. Instead hold the medicine cabinet from the Aluminum frame when installing.
PRIOR TO MOUNTING It is not necessary to remove the door, if the size is large,you can choose to remove doors for easy mounting
RECESS MOUNT INSTALLATION CONTINUED Frame the opening for the cabinet based on the measurements. Affix using hardware screws into the studs. Connect electrical wires before inserting the cabinet into the opening.
SURFACE MOUNT INSTALLATION Measure the distance between the 2 marks. Level&mark the drilling holes on the wall. Put the aluminum bracket aside. Drilling the screws into this bracket to hold on the cabinet on the wall. Pick up the mirror cabinet with two people.Place the cabinet against the wall&slide down the mirror so the aluminum bracket safely gets inside the cabinet's top frame. Use the built-on plug to connect to power directly.
FINAL ASSEMBLY