Specifications

30
RELAY ACTIVE BY PA OUT KEY
SWITCH → PRESET 1.
LED BLINKING → The relay is activated when the PA output is active
with the PA out switch. Factory default.
LED OFF → The relay is not activated when the PA output is
active with the PA out switch.
RELAY ACTIVE BY TALK A KEY
SWITCH → PRESET 2.
LED BLINKING → The relay is activated when the microphone of the line
A is active with the TALK A switch.
LED OFF → The relay is not activated when the microphone of the
line A is active with the TALK A switch.
Factory default.
TALK KEY MODE
SWITCH → PRESET 3.
LED BLINKING → Push to talk mode, the TALK switch don't have
latch mode.
LED OFF → Latch in short time presses of the switch and push to talk
in long presses of the switch. Factory default.
CALL/TALK KEYS INVERTED FUNCTION
SWITCH → PRESET 4.
LED BLINKING → The Call switch and the talk switch and indicators
are inverted in function. Call key becomes Talk key and
vice versa.
LED OFF → The Call switch and the talk switch and indicators,
are working as normal.
Factory default.
CHANGING INVERTED FUNCTION LABELS.
TALK label. Open the Call lens by pulling it out. Change the included label accordingly.
CALL label. You have to place the included label over the TALK text.
* → The parameters “ONLY EF-204 DIRECT ACCESS“, marked *, can not be set
directly on the EF-202 base station, but can be configured via the control software:
ALTAIR EF-204.
EF-202/EF-204 MASTER STATION - SERIE E-200
11
31 27
9
31 27
9
31
31
11
6
1112
12 11