Instructions / Assembly

1. Build on 3-Rails

Use 3-rails in new construction or add a 3rd rail when remodeling.

A: Top rail should be 6 inches from the tip of fence.

B: Bottom rail should be 6 inches from the bottom of fence.

C: Center the middle rail between top and bottom rail.

D: Add a cap rail to help control the expansion and contraction of

your wood fence (this rail is in addition to the 3-rails used to

construct your fence).

2. Avoid Ground Contact

3. Use Galvanized or Stainless Fasteners

4. PerASTMF537-01(2007)WoodFenceDesignSpecicationsallowfor1/8"spacebetweenboards

Design and build your fence allowing for expansion and contraction.

For Example:

A: Privacy Fence Construction – Build with 1/8" space between boards.

B: Shadow Box Fence Construction – Allow boards to overlap from front

to back.

C: Board/Batten Privacy Fence Construction – Space bottom boards 4" apart.

Nail top boards over the 4" space (the 4" space is only applicable when

using 6" boards).

Suggestions For Installation

ofYourFence

C:Board/BattenPrivacyFence

A:PrivacyFence

B:ShadowBoxFence

Notice overlap

Allow 1/8" space for

expansion and contraction

www.AltaFP.com

Space bottom boards

4" apart

(when using 6" boards)