Manual
51
17. Cleaning and maintenance
• Before cleanig, the instrument and accessories
must be disconnected from the power supply as
described in the safety instructions.
• Do not insert any objects into the measurement
aperture for cleaning. The instrument could get
damaged - affecting a proper and safe operation.
• Do not use any acetone! The instrument
housing is resistant to a number of solvents, but
cannot be guaranteed to withstand all chemicals.
You should therefore use a soft, moist cloth for
cleaning. For cleaning excessive dirt, use
ethanol or cleaning alcohol.
• A cleaning mat to clean the unit’s wheels is
situated on top of the reference tile’s cover.
Therefore, roll the wheels several times over the
mat and then over a cleen sheet of paper. Dirt
will stick to the mat and can be removed with
clear water.
Cleaning and maintenance