Owner's manual

Onceyouhavereachedthepresetnumberof

measurements (n = ...) you might be prompted

toenteranameforthecheckzone(“Input

Checkzone”aktivated).

Proceed by entering the name of the checkzone as

described above for the parameters.

If“InputCheckzone”isdeactivated,theinstrument

automatically assigns the name SAMPLE 01 and

then increments this name.

To exit the test series, presss the scroll wheel and

activate End Test Series.

Measure

SAMPLE01 n=2/3

Wa 10.8 11.5 1.8

Wb 17.4 17.8 2.1

Wc 8.7 9.2 0.9

Wd 12.3 12.9 1.4

SW 15.7 15.5 0.8

LW 7.8 7.3 1.2