User's Manual

Getting Started

Place your inMotion Air speaker on a desk, bookshelf, counter, or

other hard surface. To maximize the wireless range of the speaker, we

recommend you place the speaker (and the USB transmitter, when pairing

with a computer) at least 1 meter (3 feet) above ground level.

How to Install the AC Adapter

1 Make sure the shipping and long-

term storage switch is in the “ON”

position.

2 Connect the AC adapter cable plug

into the speaker’s jack.

The jack is located on the back of the

inMotion Air speaker.

3 Plug the AC adapter into a wall

outlet.

WARNING Use of an AC adapter other than the one supplied with your

inMotion Air speaker may damage the product. Use only the supplied

ACadapter.

How to Charge the Lithium-Ion Battery

Your inMotion Air speaker includes a rechargeable lithium-ion battery. This

battery should be fully charged before initial use of the speaker.

1 Make sure the shipping and long-term storage switch is in the

“ON” position.

2 Connect the speaker to a wall outlet.

See the How to Install the AC Adapter section. When the speaker is

powered on, the “POWER” LED will turn green. When the speaker

is off, there is no visual indication that the battery is charging, but it

will continue charging until fully charged, as long as the speaker is

connected to a wall outlet.

3 Allow the battery to charge for a few hours.

WARNING During the recharging process, it is typical for the battery

to become warm. To be safe, keep ﬂammable materials away from

thespeaker.

WARNING To maintain optimal battery performance, (1) fully charge the

battery before initial use, (2) make sure the battery is fully charged and

the shipping and long-term storage switch is in the “OFF” position before

storage, and (3) recharge the battery at least once a month.

A full battery charge will provide up to 6 hours of continuous playing time.

The “POWER” LED indicates the battery charge level:

• Green: Good

• Amber: Low

• Blinking amber: Very low

When the “POWER” LED begins blinking amber, you should recharge the

battery, as the speaker is about to automatically shut down.