SDS

Safety Data Sheet Version: V1.1
According to 2012 OSHA Hazard Communication Standard
(29 CFR 1910.1200)
REPORT NO.: LCS170701078AS
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD.
Page 4 of 12
Chemical Name CAS Number Weight (%) Trade Secret
Lithium Cobalt Oxide (CoLiO
2
) 12190-79-3
37
*
Copper 7440-50-8
6
*
Graphite 7782-42-5
39
*
Phosphate(1-), hexafluoro-,
lithium
21324-40-3
6
*
Aluminum foil 7429-90-5
12
*
“ * ” The exact percentage (concentration) of composition has been withheld as a trade secret.
Section 4- First-aid Measures
Description of first aid measures
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact: Immediately rinse with water.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Most important symptoms and effects, both acute and delayed No further relevant information available.
· Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Section 5- Fire-fighting measures
(a) Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
(b) Unsuitable extinguishing media
CAUTION: Use of water spray when fighting fire may be inefficient.
(c) Specific Hazards Arising from the Chemical
The product causes burns of eyes, skin and mucous membranes. Thermal decomposition can lead to release
of irritating gases and vapors.
(d) Hazardous Combustion Products
Carbon oxides.
(e) Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or
equivalent) and full protective gear.
Section 6- Accidental Release Measures
(a) Personal precautions, protective equipment and emergency procedures
If the battery is released, remove personnel from area until fumes dissipate. Provide maximum ventilation to clear
out hazardous gases. The preferred response is to leave the area and allow the vapors to dissipate. Avoid skin and
eyes contact or inhalation of vapors. Remove spilled liquid with absorbent and incinerated. If leakage of the battery
happens, liquid could be absorbed wit sand, earth or other inert substance and contaminated area should be
ventilated meantime.
(b) Environment precautions
Do not allow product to reach sewage system or any water source.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.