Operation Manual

support.alteclansing.com

Browser setup continued...

• Select your home network from the available list.

• Enter your password.

• Press the JOIN button. While the device is trying to connect to the

Wi-Fi network the status LED will ﬂash purple. Once a connection has

been established, the status LED will turn solid blue.

NOTE: If your Wi-Fi network does not appear as in the available list, try refreshing your browser. If the

status LED continues to ﬂash purple after 15 seconds or more, there is a problem connecting to your

home network. Usually this is caused by an incorrect password.

Follow these easy steps.

• Press the “Wi-Fi Connect” button, located on the back of your device.

• Wait for LED to start ﬂashing orange.

• Starting from Step 2, go to your system’s Wi-Fi setting and select “inAir Setup”.

• Repeat the steps as instructed.

• Make sure to check the Wi-Fi Settings of your Mac/PC or iOS device, and re-select your home network.

5. Choose your home Wi-Fi network