Operation Manual

18
support.alteclansing.com
Push Button Setup
• Push the ‘WPS’ button on your router.
• Press and hold the ‘Wi-Fi Connect’ button, located on the back of your
inAir 5000, for 5+ seconds.
• The Status LED will turn blue and begin to flash rapidly.
• Wait for the status LED to turn to solid blue. This will confirm that the
inAir 5000 has successfully connected to your router.
NOTE: Setting up your inAir 5000 by this method will automatically generate a default name. For
example, “inAir 5000 12346”. You can use the inAir Guide app, available on the App Store, or enter
“Wi-Fi Setup” to change your device name.
1. Setup
press and hold
WPS