Operation Manual

8
support.alteclansing.com
Using the inAir Guide app continued...
• Please wait 20-30 seconds for the
inAir 5000 to power on.
• When the Status LED begins to flash
purple, launch the app.
• Press SETUP to continue.
NOTE: If your device is not detected, make sure your USB cable
is securely attached and that your inAir 5000 is powered on.
3. Using the app
• Give your inAir 5000 a custom name
or select one from the predefined list.
Creating a unique name is helpful if
you plan on adding multiple devices in
your home.
• Press NEXT
• You will receive a confirmation that you
have successfully named your inAir 5000.
• Press NEXT
NOTE: To change your device name after setup, just connect
your USB cable between the inAir 5000 and your iOS device
and launch the inAir Guide app. Enter Settings and select
Device Name.
4. Naming your inAir 5000